I have two sets of PP1 Ford wheels and want to go square:

[hlh1]

I have two sets of PP1 stock rims and I think they're 9x19 front and 9.5x19 rear, please correct me if I'm wrong. The stock front PP1 tire size is 255/40/19 and the rear PP1 tire size is 275/40/19.

Can I put the extra rear PP1 wheels and tires up front, stock, without any rubbing issues?

Sponsored

 

[DonnieO]

You'll need a 5mm spacer at minimum.

 

[hlh1]

Ok, I'll get myself a set of four 5mm offsets. The rear could be offset the same just for looks.

 

[86pagt]

PP1 rear wheels on all 4 corners with 25mm spacers, 275/40/19 lowered with BMR minimum drop springs... no issues

 

[shogun32]

I have two sets of PP1 stock rims

use the 9's for winter tires, the 9.5 for summer.

 

[hlh1]

86, that's exactly what I need to see. You and I have the same car if yours is an A10. I see you've blacked everything out and have the PP2 splitter. Looks nice!

Do I need to go to 25 mm spacers if I'm not lowered? What's the minimum I need to make this work?

 

[hlh1]

use the 9's for winter tires, the 9.5 for summer.

That's a good idea. Right now I'm running the stock PS4s and the spare staggered set has a set of PS A/S 3+ tires. I could see having PS4s for summer and A/S 3's for "all season".

Sponsored