Whipple Heat Heat exchanger?

[OrangCrush]

How many bottles of water wetter do I use on the oversized heat exchanger?

Sponsored

 

[EFI]

How many bottles of water wetter do I use on the oversized heat exchanger?

You don't fill the entire thing with water wetter, that product is an additive meaning you add a small amount of it to regular coolant.

The easiest way to know is to cap off one end and start filling it with coolant until it starts spilling out.

 

[OrangCrush]

You don't fill the entire thing with water wetter, that product is an additive meaning you add a small amount of it to regular coolant.

The easiest way to know is to cap off one end and start filling it with coolant until it starts spilling out.

Lol. I know. I didn’t know if it was one or two bottles of water wetter. I just put one.

 

[NastyPumpkin]

Use at least two.

 

[AZ_whippleS550]

I used 2 for the standard. I would say use 2.5 or 3 for the oversized.

 

[Tom@Lethal]

I would use a minimum of 2 bottles for the standard sized one and 3 for the oversized. It’s not going to hurt anything but make sure you have a good ratio of water/anti freeze of not more water.

Sponsored