What did you do to your GT350 today?

[Lorne34]

I have it on my splitter. Install was super easy. Used 3m adhesion promoter first and then installed the Sliplo. Once it’s on, and the car is lowered you can’t see it. I had a hard time drilling extra holes into a $1500 R splitter. I’ve had it on for over a year and it’s saved my splitter numerous times

thanks.. I keep going back and forth....I think either one will do the job. So far I haven't scraped at all, even on my driveway apron...need to make a decision soon so I can get it protected and move on...

Sponsored

 

[Caballus]

I have it on my splitter. Install was super easy. Used 3m adhesion promoter first and then installed the Sliplo. Once it’s on, and the car is lowered you can’t see it. I had a hard time drilling extra holes into a $1500 R splitter. I’ve had it on for over a year and it’s saved my splitter numerous times

Is that a single kit?

 

[DSW]

Minor Coronavirus boredom upgrade but boy does it clean up that hideous stick coolant tank. Subtle black Ford Performance sticker on it to make it pop a bit. Very happy.

Where'd you get the decal?

 

[CNFLCTD]

Where'd you get the decal?

I found it on ebay of all places.

 

[grey_ghost_350]

Is that a single kit?

Yes. Had a few pieces left over but used almost all of it.

 

[Lorne34]

Yes. Had a few pieces left over but used almost all of it.

from my understanding a single kit is all you need to adequately cover the spliter..
Here is a good video on the install...

 

[Husky00]

I have it on my splitter. Install was super easy. Used 3m adhesion promoter first and then installed the Sliplo. Once it’s on, and the car is lowered you can’t see it. I had a hard time drilling extra holes into a $1500 R splitter. I’ve had it on for over a year and it’s saved my splitter numerous times

I also applied the slip lows and I agree the process is simple and offers great protection without having to drill holes. As long as you properly prep the surface, use adhesive promoters and use a heat gun, the slip lows will not come off. They are also unnoticeable once they are on. They have already protected my splitter numerous times.

 

[locknload]

Those are just some ramp/blocks from Harbor Freight but without the ramp attached to them.

Are they old, have a link? I don't see them on the HF site. Thanks.

 

[grey_ghost_350]

Are they old, have a link? I don't see them on the HF site. Thanks.

I bought them in store back in 2013...I had just bought my 2013 GT which is why I remember.

 

[grey_ghost_350]

Are they old, have a link? I don't see them on the HF site. Thanks.

Did a google search and found this. Magnum 16,0000 Automotive was the name.

 

[galaxy]

There's no way you "need" to remove the splitter to install that stuff. Guys must just be doing it for convenience??

 

[Wildcardfox]

There's no way you "need" to remove the splitter to install that stuff. Guys must just be doing it for convenience??

Agreed. I installed Scrape Armor on my R and all I had to do was lift up the car to get underneath the splitter. But whatever works.

 

[Scooter MGee]

Long gone, thanks for the reply.

Looks like Walmart has 'em........... https://www.walmart.com/ip/Magnum-A...um-16-000-Lb-Automotive-Ramp-System/132035152

 

[torque124]

Looks like Walmart has 'em........... https://www.walmart.com/ip/Magnum-A...um-16-000-Lb-Automotive-Ramp-System/132035152

No way those clear the spoiler on GT350 (let's not mention the R, which needs a 7 degree ramp).

 

[torque124]

... and if you have a GT350, where the splitter is 250, just get a spare... it is not that expensive in case it gets really scratched. I did scratch mine a few times ( on the 350) and you could not tell unless you look underneath. Who cares. If you are really concerned, just get a replacement. Ended up selling the replacement separately, never installed, not that big of a deal.

Now I understand this for an R where the splitter is over 1G...

Sponsored