The Royal Crimson Mach 1 Project

[Allentown]

Scoops installed. Getting closer to my vision .

Sponsored

 

[Allentown]

I have decided to just install a ford performance pack Wing spoiler. It is the nearest thing i can find to proper mach 1 blade spoiler so i ordered it today. If it comes with the mounts and wing as separate pieces it should be easy to get wrapped and installed.

 

[Allentown]

Got a couple outside shots today. It needs a wash.

 

[Allentown]

Washed it yesterday and noticed how Good she looked in low light on my way in tonight

 

[Allentown]

My wish list for summer wheels included the following:

1)Sticky but not crazy expensive
2) Square as they will wear faster and might benefit from being rotated
3) Not need spacers or crazy camber to run on the front.

So..here they are: Potenza S007A 275/40/18

I have a set of 18x10 light weight wheels coming in, this time in anthracite (again, no good looking retro style wheels to choose from in the ultra light weight category..at least that i could afford).

If you ever wondered how much more meat is on the road goin from 235s to 275s the two heights tell you. By the time you look at the whole stack it is almost like you have a 5th tire on the ground (and probably more so if i had 285s).

Add 1.6 inches if these were 285s...which I could have run but found only 1 set in that size in the "extreme summer sticky" category....the notoriously short lived RE71

 

[Allentown]

Can't wait for warm weather to run these

 

[Allentown]

Forgot to post pictures if the Willwood 13886 DR kit that goes on in Feb.

Literally everyone telling me the Ford Brembos are better but these are lighter, cheaper to buy rings for, and I actually got them cheaper.

 

[Allentown]

Here is a pretty bad shot of the wing spoiler that is goin on it.

I'd take another but my wrap guy picked it up a few hours ago to wrap it in 3m 1080r matte black.

 

[Allentown]

A few other things. Vertical links. Bumpsteer kit, adjustable toe links and ford performance knuckle bearings.

I never took a picture of the Gtrac brace and the IRS sub frame brace, they are already installed.

 

[Allentown]

Next week another closet full of stuff and then some are going on the car.

 

[Allentown]

Got the spoiler wrapped and installed but it's all gotta come back off.

The primer won't hold the wrap , it will have to be clear coated and redone.

 

[Allentown]

Steeda install today.

 

[Jetnoise]

I’m partial to the Royal Crimson.
Thanks for sharing your mod diary

 

[Strokerswild]

Somebody has a saltwater fish tank.

 

[Allentown]

Somebody has a saltwater fish tank.

And it was nice until my grow light for my fuge (in the sump) made the temps too high over the summer and killed most of my corals.

Sponsored