Wheels of Fortune - Signature Wheels

[17RubyShelbyGT350]

What is the wheel weight for the SV107s? The bronze looks good on your car - thinking it would look killer on my Ruby...

Sponsored

 

[50 Deep]

What is the wheel weight for the SV107s? The bronze looks good on your car - thinking it would look killer on my Ruby...

Thanks man. R spec 107’s should be right at 21/22lbs . Standard 350 sizing would be 21lbs front and rear. Lightweight and will show off the brake package immensely. The brushed Bronze Tinted on ruby will be killer.

 

[superman07]

Pm price for 502 r spec, flat black finish.

 

[50 Deep]

Pm price for 502 r spec, flat black finish.

Got it

 

[honeybadger]

Got caliper clearance?

Edit: sigh. My gif isn't working. #fail

Edit 2: HAHA. #NailedIt

 

[50 Deep]

Got caliper clearance?

Edit: sigh. My gif isn't working. #fail

Edit 2: HAHA. #NailedIt

Like throwing a hot dog through a hallway

 

[Epiphany]

Impressive!!

 

[50 Deep]

A few camera phone photos of our multi-piece Signature Wheel SV307S. This is the first multi-piece set ever built for a GT350. The wheel weights for the multi-piece design are generally heavier than a monoblock. I was impressed when these came in lighter than the 26lb spun forged Shelby American wheels that were on the car before. The fitment is spot on, and we look forward to seeing this car on track soon. Owner is Trak_Wpn on Instagram.

20x10.5 - 24lbs
20x11.5 - 23 lbs

 

[50 Deep]

Here we are at the end of May, and celebrating another great Memorial Day Weekend. We have a lot of updates to share, and also want to thank all of those military and first responders that made the ultimate sacrifice. A special discount will be offered to anyone who is a current/former member of the military or a first responder. That offer will expire NEVER, and thanks for your service.


Ready to Ship Sets

SV104 – 19x11 Square Rotatable – Matte Black
I have a set of our SV104 built and ready to ship. They are built in a 19x11 et50 square rotatable setup for track focused GT350 owners. To run these you will need a 25mm front spacer and extended front studs. They are equipped with anti-slip bead knurling and ready to be put to the test. No 5 week wait for these, so get them while you can.

SV104
19x11 et50
Matte Black
Anti-Slip Bead Knurling
20 lbs each

SV108 – 19x9.5 Square Rotatable – Brushed Bronze Tinted
This is a set of our SV108 built and ready to ship. They are a 19x9.5 et40 square rotatable setup. Perfect for our 2005-2014 S197 owners. Based on the Boss 302 and Roush wheel specs they are cut for big brakes and good for a lightweight street/track setup. Anyone interested let me know as I will have reduced pricing to see these debuted on the S197 platform.

SV108
19x9.5 et40
Brushed Bronze Tinted
20 lbs each

SV703 – GT350R spec – Gloss Black
Wanted to introduce @ Shelby_5.deuce into Signature Nation. His Orange Fury GT350 will be debuting our newest wheel release, the SV703. I cant wait to show photos of the wheel on its official release. Be sure to check him out on Instagram.

SV703 – 20” GT350R Spec – Brushed Triple Black Tinted
Started to speak with M6G member [MENTION=23012]Hollywood[/MENTION] some time last year regarding a set of our wheels. He started with a GT350, and made the jump into a beautiful Avalanche Gray GT350R. He will be the first R to showcase the new SV703, and the first in a 20” setup. Good guy that I am looking forward to working with, and glad we found the right wheel for him.

 

[50 Deep]

SV104 – GT350R Spec – Brushed Bronze Tinted
Got the first set of Brushed Bronze Tinted SV104 mounted on a GT350R. The initial photos I have received look fantastic against the shadow black. If you see the owner Craig rolling around Buffalo, NY, be sure to give him a thumbs up.

SV307S – 20” GT350 Spec – Brushed Triple Black Tinted / Brushed Aluminum
Our very first 2-piece GT350 setup has been very well received on social media. Here are an additional few photos I have gotten. Be sure to check out [MENTION=23919]tra[/MENTION]k_Wpn on Instagram, at Mustang Week, and on the local road courses.

SV501 Track Spec – 20” GT350R Spec – Matte Black
Our very first SV501 GT350 from The Snake Pit in Ohio was in for some detail work at Blockachip in Ohio. They snagged a couple legit photos. @The_Snake_Pit_ on Instagram

 

[50 Deep]

SV701 – 20” GT350R Spec – Gloss Black
Another one of our beautiful SV701 GT350R customer cars from The Snake Pit was in at Blockachip as well. These photos are some of the best I have seen to date. These guys really make me realize how good the 20” wheel looks on the platform. Check them out @The_Snake_Pit_ on Instagram

​​

SV107 – 20” GT500 Spec – Crystal Burgundy
Looks like we have the GT500 specs figured out for the S197. The owner of Blown Dead Line does a lot of custom cerakote work for firearms, but his car is deadly as well. Just broke the 900rwhp mark and looking for more. Check him out @blowndeadline on Instagram

SV501 Track Spec – GT350R Spec - Gloss Gunmetal
Summer is upon us, and our track guys are having a good time. Nothing wrong with hard parking for some photos every now and again though. This Deep Impact Blue and Gloss Gunmetal combination have turned out very well. Be sure to follow [MENTION=15431]Blu[/MENTION]_voodoo on Instagram for more.

 

[50 Deep]

SV501 Track Spec – GT350R Spec – Gloss Gunmetal / Gloss Black
The creative expression of enthusiasts is one of the things I love the most. @Vudosnake on Instagram decided to split the color of his SV501 to fit both his moods. Wish I was able to see this car running around Canada. With a track day under his belt already the rest of the year should have a lot more in store.

SV103 – GT350R Spec – Brushed Triple Black Tinted/Brushed Bronze Tinted
I may have had a little influence on this build, and I am glad to see it come to life. [MENTION=21260]Ag[/MENTION]ri39 from Instagram finally got his wheels delivered and mounted. His grabber blue GT350 is wrapped in a satin PPF so give the car its unique look. He went from the OEM 19x10.5 / 19x11 - 295/305 setup to a 19x11 / 19x11.5 305/325 setup and still dropped 30.4 lbs of rotating mass. This was with the wheels/tires mounted and balanced and compared for both the OEM and Signature setup. He is already reporting that the car feels faster and is more responsive. #Rotatingmassmatters!

SV702 – 20” S550 Fitment – Crystal Burgundy
Very soon we will have our very first set of SV702 mounted on [MENTION=9347]S550[/MENTION]_Coyote from Instagram. Wheels are getting ceramic coated before installation tomorrow!

Signature THREE
Some of the very first sets of the newly released Signature THREE are being mounted and built. These are one of our Flagship Series designed for a low offset. The OEM mustang fenders will not fit them, but anyone running a widebody or fender flares will have one bad ass set of wheels.

Do it once. Do it right. Do it Signature Wheel

 

[DrumReaper]

What studs are those on the last blue 350?

 

[50 Deep]

What studs are those on the last blue 350?

Looks to be ARP. I think they just happen to work with the wheels dimensions perfectly

 

[CSL]

Dang Terrance, you’ve been BUSY! Nice work

Sponsored