2017 Ford Mustang PP Grabber Blue Journey to the Whipple Whine

[Sherrodmustang]

Foam Cannon, clay bar and then polished and waxed..

Sponsored

 

[Whitemustang2016]

Great job on the mustang looks very clean. I’m really liking those peoject R wheels I might have to grab a set

 

[Sherrodmustang]

Looking for rear OEM leather seat if anybody has one laying around they might want to depart with for some $$.

https://www.mustang6g.com/forums/showthread.php?t=102451

 

[Sherrodmustang]

Alright, did some work yesterday on the seat install.

I pulled the seats and both wiring harness on both OEM seats. I hate all the install videos and pictures I have seen with a huge big mess of wires zip tied to the seat brackets. Looks horrible and would drive me crazy to look at and know that mess of wires is under my seats.

So.. I pulled both harness, separated all the wires from the loom and tape and figured out what went where and how to make it look clean for the install. Took some time, but will be clean install with no messy wires all zip tied everywhere under the seat brackets.

Custom made seat harnesses!

 

[SoCalTim]

Love the attention to detail with the wiring

 

[Sherrodmustang]

Some work...

Waiting on spacers to come in today so I can mount everything up.

Next up, popping open the headlights and installing demon eyes and Diode Dynamics drl boards.

Also have some rear leather seat covers on the way to help match the leather Braum seats.

 

[Sherrodmustang]

Alright seat are in and no lights.

 

[Sherrodmustang]

Next up, headlights...

 

[Sherrodmustang]

Finshed up today on the Demon Eyes and DRL boards.

Also stated on the rear leather seats and red stitching.

 

[Sherrodmustang]

One issue..

I have slight glow from the demon eyes when turned off. Like it is getting slight power from the Diode Dynamics controller even when off.

Update:

For some reason the wire used to automatically cut off the demon eyes when the headlights come on. For some reason is back powering the demon eyes even when off.

 

[Nagare]

They're showing you who the real demon is lol, love glancing through this thread for all your progress pics.

 

[Sherrodmustang]

They're showing you who the real demon is lol, love glancing through this thread for all your progress pics.

I appreciate that..

Love to work on the car, just fun for me.

Hopefully will get started on the rear leather seats here shortly. Have a short vacation coming up, so will be a week or so before I can get started.

Diode Dynamics DRL's and sequential turn signal ligts!

 

[Sherrodmustang]

Alright...

Rear leather seats installed and looking great. Will post some pictures up if I get a chance in today or tomorrow.

Next up is the Steeda front 38mm swaybar and billet mounts for the front. Will get started on it tomorrow and post up some pics.

Been researching whipple superchargers here lately. Looking at stage 2, gen 3 with 150mm tb and some injector dynamics and boost a pump to start with. Would like to maybe get the 10 rib setup and obviously swap out the oil pump gear and sprocket.

Obviously I am limited to what it can do with a stock motor. But would be nice to see 700 to 750 rwhp to start with out the gate on stock motor.

Not my first rodeo, I had a 3v with KB 2.8 and 10 rib setup, Fore fuel setup running 30.8lbs of boost on e85 making 888 rwhp and just as much torque.

Would love to break the 1000 rwhp mark one day.. will see.

2008 Ford Mustang...

 

[Sherrodmustang]

Steeda Massive front swaybar and billet mounts.

I think up next will be QA1 Carbon Fiber Driveshaft.. will see... should be here in a week or so.

Also looking at the Trackspec Hood Vents..

 

[Sherrodmustang]

Alright..


QA1 Carbon Fiber driveshaft will be here today.

Also have Anderson Composites gt350r Carbon Fiber rear spoiler on the way in couple days.

I also have plans to have the roof wrapped in 3m gloss black next week. Hopefully will make the car flow better and match the spoiler and Trackspec Vents when I get them on the Mustang.

I also have a Ford Performance window banner getting done with the Performace lettering done in grabber blue.

Sponsored