Paxton w/3.6 Pulley Boost/HP

[Marvelous D S550]

Hey guys I'm just curious what you guys with Paxtons are seeing boost/HP with similar setups as mine.

2015 GT MT 373
Tuned by Lund
2200 SL Paxton w/3.6 pulley
ID1000s
Jlt
Tial BOV
GT350 manifold
Long tube headers catless

I run 91/w Octane booster and I plan on going E85 soon. I have not yet dynoed my car but I'm seeing 10lbs of boost and I can beat Hell Cats.

Sponsored

 

[Angry50]

id guess in the 650-700whp range... but of course can vary.

 

[jlstro3]

I was on 93 and made 661 with nearly your same setup(minus the jlt intake), we were gun shy at let off at like 6900. I had just finished it up and I guess we were worried heh. Anyway it was still making power at that point so I'm guessing I could've gotten somewhere close to 680-700, idk. As always w/ dynos, your mileage may vary.

 

[asylum938]

Hey guys I'm just curious what you guys with Paxtons are seeing boost/HP with similar setups as mine.

2015 GT MT 373
Tuned by Lund
2200 SL Paxton w/3.6 pulley
ID1000s
Jlt
Tial BOV
GT350 manifold
Long tube headers catless

I run 91/w Octane booster and I plan on going E85 soon. I have not yet dynoed my car but I'm seeing 10lbs of boost and I can beat Hell Cats.

My car with an almost Identical setup minus the GT350 intake manifold.

Made 672/535 at 10lbs

 

[Marvelous D S550]

My car with an almost Identical setup minus the GT350 intake manifold.

Made 672/535 at 10lbs

Awesome to hear.. I was worried that my boost was low. Lund said the logs(car) looks soild. thanks for the reply.

 

[dsp4848]

Last year I had mine dyno'd and put down 630whp. I don't have headers and am on the stock intake manifold. Also not sure how accurate that dyno is, but it doesn't sound too far off. I don't have a boost gauge, but about 10psi seems to be what the 3.6" pulley will produce on our motors.

I would also guess your setup right now is in the 650whp-700whp range. Add E85 and I bet you'll pick up another 75whp or so.

 

[smann]

670 WHP with stock im, stock headers, stock intake (upgraded to the K&N filter that comes with the kit) on 93

 

[Marvelous D S550]

670 WHP with stock im, stock headers, stock intake (upgraded to the K&N filter that comes with the kit) on 93

Nice!

 

[5.oh]

Mods in Sig.....similar to yours on a 3.6pulley and e85

 

[Marvelous D S550]

Mods in Sig.....similar to yours on a 3.6pulley and e85

Thanks! what were you doing on pump gas?

 

[5.oh]

Thanks! what were you doing on pump gas?

Don't know never ran it on pump

 

[MikeyPee]

We’ve got similar setups Danny. I’m still on the stock pulley, and on an unfinished E85 tune I put down 714

 

[COStang777]

Just got the car back today from Palm Beach Dyno. With the Paxton and the 3.6 pulley she did 689 rwhp with the JLT intake and 728 rwhp with no intake (open blower). Stock cats, manifold and on pump 93.

 

[beefcake]

very nice! love those paxton kits

 

[Tommy V]

Just got the car back today from Palm Beach Dyno. With the Paxton and the 3.6 pulley she did 689 rwhp with the JLT intake and 728 rwhp with no intake (open blower). Stock cats, manifold and on pump 93.

730,stock.cats and manifold and on.straight 93,whats next????

Sponsored