TorqueMan
Well-Known Member
- Joined
- Aug 24, 2017
- Threads
- 7
- Messages
- 693
- Reaction score
- 219
- Location
- St. Jacob, IL
- Vehicle(s)
- 2017 EcoBoost Premium
Does anyone have a comprehensive list of the differences between 2.3 and 3.0?
Sponsored
Welp. Apparently they weren't kidding. Off to get a 32gig drive now....Couple of months ago I upgraded from 2.2 to 2.3 using an 8GB USB 2.0 drive. Worked fine.
Since then, I bought a 128GB USB 3.0 drive and used it to upgrade from 2.3 to 3.0. Worked fine.
I got away with it using a USB 2.0 16 GB drive >.>Welp. Apparently they weren't kidding. Off to get a 32gig drive now....
Hmmm.I got away with it using a USB 2.0 16 GB drive >.>
I'm starting from scratch again. Downloading the file once again. I got the message posted above, memerror3.I used an 8GB drive - the USB just needs to be big enough to hold the files, which are copied into Sync3 and then installed.
The copy process can take a long time if you have an older style USB - if it has a light in it, then you can see activity is taking place.
Sync3 only tells you that it is installing an update *after* the files have been copied off from the USB and into Sync3. Depending on your USB drive speed, the copy process can take 10 minutes or more, and there is nothing on Sync3 to show this is happening.
I believe its saying it had problem reading or writing the USB. I doubt you need a bigger as much as a different. But if you don't have another the same size, makes sense to get bigger anyway for whatever else you use it for.Welp. Apparently they weren't kidding. Off to get a 32gig drive now....
How did you download 2.2?i believe so, i had to downgrade to 2.2 from 17276 before i could upgrade
sometimes people take backups before they get replaced with higher versions on ford.owner.comHow did you download 2.2?
Anybody wishing to share a link to 2.2?sometimes people take backups before they get replaced with higher versions on ford.owner.com
I didn't, I did turn off WiFi tho. You using a Windows or Mac to uncompressed the folder? I did get the same error you did when I tried to install 18025. I had to re-plug the USB about 3-4 time before I got it to go. Also, did you wait for the infotainment to boot up all the way (wait about a good 1 minute or so) before plugging in? I had my car engine on when I did all this.I tried to find the master reset, where is it again? Do you need to do that before the upgrade to 3.0 if you have 2.2 on it?