FIVE_LITER
Well-Known Member
Just east of indy about 5 miles or so east of 465.Morning, I’m just north of Indy & [MENTION=16078]GTP[/MENTION] just NE of Indy. U?
Sponsored
Just east of indy about 5 miles or so east of 465.Morning, I’m just north of Indy & [MENTION=16078]GTP[/MENTION] just NE of Indy. U?
If you are ProCharged and go to cars & coffee then we’ve met.Just east of indy about 5 miles or so east of 465.
Whippled and never been to cars and coffeeIf you are ProCharged and go to cars & coffee then we’ve met.
Based on reading these forums, no Mustang ever goes to more than one cars and coffee.Whippled and never been to cars and coffee
Are you saying they never go more than once or they always stick with oneBased on reading these forums, no Mustang ever goes to more than one cars and coffee.
I was referring to the ridiculous cliche that all Mustangs are totaled as they leave their first C&C. ;)Are you saying they never go more than once or they always stick with one
C & C group, and the reasoning is?
Dang! that Magnetic is killer!While I had the car on stands doing the cradle lockout kit & MGP Caliper Covers I noticed the passenger rear hud & bearing assembly was bad (bearings) so I decided to do all 4 hub assemblies. When I pulled the calipers I noticed/felt like the rear brake pads were getting low on life so what’s a man to do, order new rotors & pads from BrakeMotive. The hub assemblies came from AutoNation, had a small issue with one of the hubs and Rick was Johnny on the spot and took care of me, had a slight color issue with the rotors and BrakeMotive took great care of me by overnighting 4 new rotors. Everything is back together and I didn’t have any assembly issues. Many thanks to all the previous postes on these products & suppliers and also to [MENTION=16078]GTP[/MENTION] for assembly support and loaning me a few tools and [MENTION=27640]bjstang[/MENTION] for tips & suggestions.
Great shot, look forward to the updates.Threw some new shoes on, little tint, and some BMR low Pro Jacking Rails. Now need to figure out the suspension mods,