ProCharger D-1X is in

[donmcgowen]

What rpms are you shifting at to see 10psi? [MENTION=6362]TommyV[/MENTION] is making 15 on the 4.75 by like 7500. You read that right. 15psi. FYI I have a brand new 4.38 for a D1. Pm me if you are interested.

Shifting about 7500 rpm. How much psi you hitting with the 4.38? How much you want for it?

Sponsored

 

[foff667]

Have you seen anyone else running this blower? It is hard to believe the fuel system is tapped out unless this thing is pumping out the boost. Have you had a boost gauge on it yet?

I would have to agree with this, with DW1000 injectors you shouldn't be close to running out of fuel unless your fuel pump is on its last leg or something odd.

In any event did the new fuel system end up fixing your issues? What is your IDC at @6500 & @7500 rpm?

 

[Dominant1]

I'm running this blower with the stock pulley and id 1050x injectors and a vortech bap. I'm right at 13lbs of boost making 723 rwhp. No fuel starving issues here but i do intend to go e-85 at some point. My tuner is finishing up r&d on flex fuel tunes for boosted cars & when that's completed i will pull the trigger. Right now my only issue is traction, the ground is just to cold for my dr’s!

 

[Tommy V]

Shifting about 7500 rpm. How much psi you hitting with the 4.38? How much you want for it?

That 4.38 would be perfect if u put a Watergate on your car.

 

[Terminated]

I would have to agree with this, with DW1000 injectors you shouldn't be close to running out of fuel unless your fuel pump is on its last leg or something odd.

In any event did the new fuel system end up fixing your issues? What is your IDC at @6500 & @7500 rpm?

Tested my OE pump and it was weaker than normal. Fuel system fixed the issues and the car is much stronger up top now since I can put power in it. Ended up being a good idea on the system as I plan to switch to ID1300s

 

[foff667]

Tested my OE pump and it was weaker than normal. Fuel system fixed the issues and the car is much stronger up top now since I can put power in it. Ended up being a good idea on the system as I plan to switch to ID1300s

If you don't mind how did you test it?

 

[Atticaz]

What paint did you use and how has it been holding up?

Sponsored