V8_MOTOR
Well-Known Member
- Joined
- Jan 28, 2017
- Threads
- 80
- Messages
- 901
- Reaction score
- 534
- Location
- Nottingham, UK
- Vehicle(s)
- MY17 S550 Mustang GT (EURO)
Cheers Kristjan. Very please with how they look. I just wish they had a bit more of a gloss finish rather than a dull red. I have the templates now so will keep experimenting.
If you are really nervous about it, my advice would be to trace the templates like I have the. Cut them out and see how they would position before you go ahead with the real deal.
It's easy tho. I have never done this before and did it in windy weather whilst being outside. Just take your time. Have plenty of application fluid to hand. I used my fingers and a microfibre cloth.
First position it as you would like. Using microfibres cloth get most of the water out. Then a quick dab of heat fro the heat gun from a good distance. That will then show you where the rest of the water is stuck. Work it out and then just take it from there.
If you are really nervous about it, my advice would be to trace the templates like I have the. Cut them out and see how they would position before you go ahead with the real deal.
It's easy tho. I have never done this before and did it in windy weather whilst being outside. Just take your time. Have plenty of application fluid to hand. I used my fingers and a microfibre cloth.
First position it as you would like. Using microfibres cloth get most of the water out. Then a quick dab of heat fro the heat gun from a good distance. That will then show you where the rest of the water is stuck. Work it out and then just take it from there.
Sponsored