wicker bill for GT350 track pack

[SKYLANE765]

we now have the GT350 wicker bill for the Mustang track pack spoiler and GT350 with the track pack spoiler. It comes with all mounting hardware and instructions. Made in the USA and is made of 3/16 black Lexan and clear smoke center section. see it at www.zl1addons.com

Sponsored

 

[firestarter2]

Whats the benefit of this..

 

[SKYLANE765]

Whats the benefit of this..

Down force.

 

[firestarter2]

Down force.

It is a noticeable amount or more cosmetic? And what is the rivet gun for?

 

[Zitrosounds]

Down force.

Has it been tested? Is it adjustable? What is the performance estimate?

 

[SKYLANE765]

It is a noticeable amount or more cosmetic? And what is the rivet gun for?

You have to put riv nuts in the spoiler to attach it Its not a rivet gun Its a riv nut gun.

We know the Camaro Z/28 gets 150lbs at 120mph So this is about the same size.

A wicker bill is all that is used on the Cup cars to get rear down force. This is about 1/3 the size.

 

[Mspeedster]

Do you have a side profile picture?

I'm wondering if wicker bill is angled further up and what it looks like from the side view.

 

[50 Deep]

Excellent job fellas. Glad to see this one came to production. The finished product looks damn good

 

[SKYLANE765]

Do you have a side profile picture?

I'm wondering if wicker bill is angled further up and what it looks like from the side view.

it follows the angle of the spoiler

 

[5.0 435]

Rear spoiler

Similar to the 17 GS except no center piece. Too much drag for the center piece. Z06 has the center piece + 160 more hp to handle it.

 

[Supercup]

Here is the Z/28 one for comparison. The OEM one that is tested and produces 150 lbs of down force is made out of metal, that is powder coated black. From the photo above on the GT - the angle is not as "straight up/down" as the OEM Z/28 or the GS one above - so it will produce down force, but may not provide quite since it is laying down somewhat.

 

[Colleton]

Sorry, no.

 

[Nick]

Oh Yes

 

[nastang87xx]

I need to see numbers. I need some extra downforce in the rear for Road America. I really don't want to go the R wing but I don't need just a few pounds, I need real results. The Kink is open again and the track has been very squeaky cleaned so it's a bit touchy now.

If you guys can get some real numbers at say 80, 100, and 120 MPH, I'm all ears.

 

[ford20]

You have to put riv nuts in the spoiler to attach it Its not a rivet gun Its a riv nut gun.

We know the Camaro Z/28 gets 150lbs at 120mph So this is about the same size.

A wicker bill is all that is used on the Cup cars to get rear down force. This is about 1/3 the size.

Saying that well the Z/28 gets blardey blar blar at whatchamacallit so this is a bout the same is not an answer at all.

Get back to some people with some definitive numbers or stop half assing things and telling people it will work. Might want to get us how much extra drag this will add as well.

Sponsored