Aeroflow dynamics splitter!

[Joelang33]

If for looks, then it doesn't matter. If for real performance, the MMD V series pretty much would be about as good as having no spoiler at all when coupled with a big splitter like you have. Looks good though.

ok, ya what I am saying is being that I just ordered an aerodynamics v1 splitter, do you think it will have negative performance effects torwards the vehicle? here I am thinking its going to do a good thing....:(

Sponsored

 

[HISSMAN]

It will create more drag, and front end bite. But really, on the street, it won't be anything that you would probably notice.

 

[Joelang33]

Installed.

 

[HISSMAN]

Looks fantastic!

 

[Roh92cp]

Installed.

A couple questions for you.

1. How was your experience with this vendor? The site has terrible pics and I don't even see the V2 there.

2. Looks like your has not white logo on it which I like better was that a request or something new?

3. What is it made of and how thick is it?

 

[Joelang33]

A couple questions for you.

1. How was your experience with this vendor? The site has terrible pics and I don't even see the V2 there.

2. Looks like your has not white logo on it which I like better was that a request or something new?

3. What is it made of and how thick is it?

To answer your questions.... I had a good experience with them. They are made to order so expect at least 2-3 weeks before receiving the product. And I didn't think the site was too bad, also I had no problem viewing the v2 splitter. And ya that is just a decal they send with it... so they guy above me just threw the sticker on it. And it's made of aluminum, and painted gloss black. I was expecting it to be a little thicker, but still looks really good. Also installing was super easy just bolts right on using the existing hardware already on the car

 

[Nick]

Has anyone installed this on a non-pp by just removing the belly pan yet? Seems they aren't going to make a non-pp version at this point. Does this splitter cover the belly pan area like the APR?

 

[5.0hopeful]

Has anyone installed this on a non-pp by just removing the belly pan yet? Seems they aren't going to make a non-pp version at this point. Does this splitter cover the belly pan area like the APR?

I'm interested in this as well. Would love to see if it fits the non-pp

 

[Tribefan]

Two questions:

1.) How thick is this V1 version?

2.) How easily does it bend/flex? It it pretty rigid so that if it slightly bumps on an entry/exit of a driveway that it would bend it up?

 

[Joelang33]

Two questions:

1.) How thick is this V1 version?

2.) How easily does it bend/flex? It it pretty rigid so that if it slightly bumps on an entry/exit of a driveway that it would bend it up?

1. don't have exact measurements but if I were to guess its probably around 1/4-1/2 inch thick. So enough to not look tacky, but yes I wish it was just a tad bit thicker. still looks great though.

2. before bolting it onto the car....you can tell there is a bit of flex in it. (enough that you have to use two hands while carrying it).... but after bolting it to the car... it is pretty sturdy I'd say. If I push down lightly on it it doesn't move at all....if I apply lots of pressure it will move ever so slightly. I am confident enough in it that I have not install support rods. if you scraped it on the driveway you should be good......not if you slammed it against a curb or something then ya I could see it bending/cracking on you :headbonk:

 

[Tribefan]

Aeroflow currently has 15% off with code "15offnow". I'm really thinking about pulling the trigger.

Does anyone have a link to the cheap (but hopefully not junk) support rods? Cheapest I can find are $45.

 

[Tribefan]

Does this splitter cover the belly pan area like the APR?

I'm interested in an answer on this as well. Any pics of the product not already installed?

 

[Joelang33]

I'm interested in an answer on this as well. Any pics of the product not already installed?

sadly I didn't snap a pic before I put it on. but no.... its not like the apr splitter which covers the belly pan. its more of just an addition to the stock PP bumper. it bolts right on using existing hardware. you can have this install done in 20 minutes lol. and check out ebay for the rods.... I decided to not use them because its pretty sturdy without them I am not tracking the car or anything plus I think it gives it a cleaner look without them. But I know when I was looking there were tons of options on ebay for 20 bucks or less. quality wise I don't know though...

Sponsored