Another take on the Steeda Tri-Ax shifter

[BeauxXL1200]

Just finished Brandon's DIY fix to the increased NVH that some of us have experienced with the Tri-Ax.

While the NVH had quieted down quite a bit since the original install, I wanted to reduce it even more. The fix took me about an hour using extra Dynamat and the thin lead pieces that Brandon recommends. I basically laid the four lead pieces around the shifter base and then laid down another layer of Dynamat on top of everything, including the lead pieces.

I think it's now as quiet, or even quieter, than the original shifter.

Thanks, Brandon. And thanks Steeda for much improved shifting.

Sponsored

 

[phil545]

Hey [MENTION=17979]brandonsmash[/MENTION] would you mind posting your picture again, they have all expired.

Thanks so much!

 

[brandonsmash]

Hey [MENTION=17979]brandonsmash[/MENTION] would you mind posting your picture again, they have all expired.

Thanks so much!

[MENTION=21094]phil545[/MENTION]:

Imgur and M6G for some reason don't play well with each other. I created an imgur album of the photos; they should be self-explanatory.

http://imgur.com/a/aAmYO

You may have to copy and paste that in a new tab/window, as I think direct clicks from here will block it.

Let me know if anything needs explanation. I'll be out of the country for a couple weeks with spotty Internet access but I'll help when and how I can!

 

[phil545]

[MENTION=21094]phil545[/MENTION]:

Imgur and M6G for some reason don't play well with each other. I created an imgur album of the photos; they should be self-explanatory.

http://imgur.com/a/aAmYO

You may have to copy and paste that in a new tab/window, as I think direct clicks from here will block it.

Let me know if anything needs explanation. I'll be out of the country for a couple weeks with spotty Internet access but I'll help when and how I can!

Legend, thanks mate!

 

[Evil Minion]

Glad I stumbled across this thread. Definitely going to be doing this as soon as I get the extra materials delivered.

If anyone is curious, you can order small sized sheets of lead in various thicknesses from McMaster-Carr. Snagged a 6"x6" 1/16" sheet for $11.

Sponsored