What did you do to your S550 Mustang today?!

[scott_0]

put my oem wheels and all season tires on for the winter months, changed the oil for the first time, and washed it

Sponsored

 

[jvandy50]

second amsoil oil/filter change at 13k. gonna send this one off just for grins

i have decided there's no way to not make a mess with the filter lol(all my english teachers can suck that double negative!)

 

[GT Pony]

second amsoil oil/filter change at 13k. gonna send this one off just for grins

i have decided there's no way to not make a mess with the filter lol(all my english teachers can suck that double negative!)

I changed the oil on my GT a few weeks ago and didn't make any mess. Use some heavy aluminum foil and make a shield below the filter to keep the oil that pukes out of the filter and mount off the parts below the filter. Just loosen the filter enough to start the oil draining, but don't remove it until it stops draining will also help.

Like this:

 

[car]

I changed the oil on my GT a few weeks ago and didn't make any mess. Use some heavy aluminum foil and make a shield below the filter to keep the oil that pukes out of the filter and mount off the parts below the filter. Just loosen the filter enough to start the oil draining, but don't remove it until it stops draining will also help.

Like this:

Lol it sure looks messy but good job

 

[scoggy_doogan]

There's a wiring harness that runs directly below my oil filter. Worst design ever since it is impossible to change the filter without oil getting all over the harness. I might have to try the tin foil method to route the oil around it.

 

[jvandy50]

i tried a gigantic ziploc...maybe i should loosen a little like you said, let it drain...with the bag stuffed over the top. instead, i kept turning, oil ran down my arms, it was glorious lol

 

[NvrFinished]

I just use a small piece of cardboard. I curved it and pushed it up against the bottom of the housing the filter screws on to. It works like a charm. The oil drips on it and runs down off the end into the pan. No mess at all except for some oil on my fingers.

 

[CCCP1999]

Vacum and a wax.

 

[RIBS]

Passed 13,000 miles since 3/2015

 

[scoggy_doogan]

Washed, clayed, and sealed. Smooth as a baby's butt.

 

[TURTL3]

I think I did a couple of things. Ride height and moar wide body next.

Looks amazing :hail:

 

[Dsquared]

Blackout day. Installed UPR gloss black emblems all the way around and a Roush spoiler. UA Black a perfect match for factory black painted roof! Easier to install than I expected.

 

[CCCP1999]

I love that blue. Maybe i should trade my black GT for a blue GT.

 

[AmericanLegend]

Installed lowering springs (BMR Performance SP080) and jacking rails (J&M).

[/IMG]

[/IMG]

[/IMG]

[/IMG]

 

[Tchaffin]

Installed Roush X-Pipe and Boomba sound delete.

Sponsored