Anyone try these eBay Intercooler pipes?

[sl1kn1ck]

Anyone try these yet?

https://www.ebay.com/itm/322222539279

SIEPOWER 2015 2.3 Mustang Ecoboost Intercooler Piping Kit

Sponsored

 

[JungleG1337]

I wouldnt not. There is no bea roll at the end of the pipes. Bound to be leaks.

 

[Ron@cp-e]

yeah this guy is funny
I asked him on facebook if he thought selling charge pipes without bead rolls was a good idea
So he blocked me
I guess that was my answer LMAO

 

[Juben]

Yeah, the seller tried saying that they've been tested at 21 psi or something similar. He also stated that he's ran non-bead rolled charge pipes on several cars without problems. If that's true, he must have been running 5 psi.

Running charge pipes without bead rolls is just asking for problems. Its funny because I've used homemade charge pipes many, many moons ago and had problems with them blowing off around 15-17 psi.

In any event, do as you please but I'd pass on them. I hear CP-e makes some nice pipes though, if you're looking to upgrade. I'm sure Ron could get you hooked up.

 

[sl1kn1ck]

He also claims 20 HP gain! Lol... He also needs to spell check his ads.

 

[Tune+]

Yea, this dude blocked me on Facebook as well when I hit him with KNAWLEDGE. He has 47lbs of bull in his shit account.

 

[TEC]

Ummm...I've pushed +35lbs of boost on IC pipes without roll beads. :shrug:

All I've ever needed were good t-bolt clamps, 4 ply IC couplers, and some cheap Walmart hairspray.

Not saying that rollbeads aren't nice to have but I'm saying....

 

[ZenkaiRacer]

You can also get a bead roller and do it yourself.

 

[Ron@cp-e]

Ummm...I've pushed +35lbs of boost on IC pipes without roll beads. :shrug:

All I've ever needed were good t-bolt clamps, 4 ply IC couplers, and some cheap Walmart hairspray.

Not saying that rollbeads aren't nice to have but I'm saying....

perfect
shopping list for my new Mustang
buy parts from ebay
supplies to make them work from Walmart

check and check

nope and nope
:lol:

 

[Ron@cp-e]

You can also get a bead roller and do it yourself.

if I need to buy a bead roller, why don't I just build the intercooler pipes from scratch

 

[Juben]

if I need to buy a bead roller, why don't I just build the intercooler pipes from scratch

That's what Hardee's makes their biscuits from, so I don't know that it'd work well for intercooler pipes.

 

[TEC]

perfect
shopping list for my new Mustang
buy parts from ebay
supplies to make them work from Walmart

check and check

nope and nope
:lol:

So I should pay twice as much for some cut up metal pipes because one has a rolled bead?

 

[Spoolin]

I made my own chargepipes from eBay and the sections I cut aren't bead rolled. I'm on a e30 tune pushed every time I drive hitting full boost and I've had 0 problems after tightening my t-bolt clamps down good. I did however use good couplers though.

 

[Ron@cp-e]

I made my own chargepipes from eBay and the sections I cut aren't bead rolled. I'm on a e30 tune pushed every time I drive hitting full boost and I've had 0 problems after tightening my t-bolt clamps down good. I did however use good couplers though.

lets see pics

here's one of my sets

 

[lisandra]

Mine pop off every onece in a while even with bead rolled pipes, are people kidding? Non bead pipes pop off like its nothing

Sponsored