Cobra jet cams?

[Niz55]

Will it work with the s550 second gen coyote? I know it works on the boss and our motors are pretty much same exact internal.

Sponsored

 

[beefcake]

s197 cams won't be a drop in on a 15+

we do have 3 stages of n/a comps available

 

[kallo07]

The 2015 intake cam is the same as the cobra jet. The exhaust cams on the 2015 has the same lift but not the duration as the cobra jet exhaust cams.

Hope this helps

Eddie

 

[Niz55]

So what other mods do I need to run these comp stage 3 came? How hard is the install?

 

[beefcake]

So what other mods do I need to run these comp stage 3 came? How hard is the install?

Direct bolt in on 15 plus. No limiters or anything needed

 

[GOTZS550]

Just nobody has posted the results of the stage 3 NA cams...I am waiting too!

 

[WhiteyDog]

So what other mods do I need to run these comp stage 3 came? How hard is the install?

I'm right there with ya. As Beef had said, there is nothing else needed for the Comp Cams. I read as much as I could on Comps website. I'm thiiiiiiis close to ordering them, but would like to hear about results, and hopefully Lund has a revision for it. I talked with a guy at Comp Cams and he told me he's thinking 60-70 hp. I'm guessing that's at the flywheel, but I don't know how accurate that is.

 

[arieso94z28]

I was gonna order the comp cams for my 15' mustang and install them during my procharger install. Never saw any results for them so I decided against it. Until I see proof that they are worth getting, then I'll stick with the stock cams.

 

[Niz55]

The question is what is the difference between all the stages? I want the best drivilibity

 

[Dominant1]

I will have results this friday for stage 3 cams, gt-350 intake and tb, arh longtubes and 3" exhaust, jlt intake and 5c converter. Adam at Rev auto says my car is the 1st car he will tune with /stage 3 cams and the gt-350 intake and tb. I was gonna get ported heads with big valves but decided i can do that at a later date. I will be happy with 475 rwhp and 400 rw Torque on 93 pump gas with octane booster. Car should scream...the whole shop is excited to see the results.

 

[Grim12]

I will have results this friday for stage 3 cams, gt-350 intake and tb, arh longtubes and 3" exhaust, jlt intake and 5c converter. Adam at Rev auto says my car is the 1st car he will tune with /stage 3 cams and the gt-350 intake and tb. I was gonna get ported heads with big valves but decided i can do that at a later date. I will be happy with 475 rwhp and 400 rw Torque on 93 pump gas with octane booster. Car should scream...the whole shop is excited to see the results.

Can't wait to see this!

 

[WhiteyDog]

I will have results this friday for stage 3 cams, gt-350 intake and tb, arh longtubes and 3" exhaust, jlt intake and 5c converter. Adam at Rev auto says my car is the 1st car he will tune with /stage 3 cams and the gt-350 intake and tb. I was gonna get ported heads with big valves but decided i can do that at a later date. I will be happy with 475 rwhp and 400 rw Torque on 93 pump gas with octane booster. Car should scream...the whole shop is excited to see the results.

WOAH!!! This WILL be interesting to see. I have close to the same mods as you listed. It will be nice to hear what gains it gives you above your current mods.

 

[Dominant1]

WOAH!!! This WILL be interesting to see. I have close to the same mods as you listed. It will be nice to hear what gains it gives you above your current mods.

Its pretty much stock now with just a catback, and it ran a best of 12.8's @ 110 mph in (drive) no paddle shifters!

 

[WhiteyDog]

Man, if you're getting all that stuff installed at once, you're gonna have a totally different car all at once! I got my GT350 IM and Kook's headers installed at the same time and dynoed and it was a noticeable difference, and you're doing the stage 3 cams yet? WOOOO!!!!

 

[Dominant1]

Man, if you're getting all that stuff installed at once, you're gonna have a totally different car all at once! I got my GT350 IM and Kook's headers installed at the same time and dynoed and it was a noticeable difference, and you're doing the stage 3 cams yet? WOOOO!!!!

That aint all its also getting a dyno tech ds, 47lb injectors, ford performance half shafts, opgs and a full steeda suspension including a stop the hop kit.
And 2pt g brace..i sold my previous vehicle for good coin so I'm able to do it all at once! Its better this way cause its easier for Adam to work his magic on the dyno tune.

Sponsored