After Market Wheel Thread

[Meraki Autoworks]

I added some HREs to mine, 19x11 305/30 front and 19x11.5 315x30 rear.

Any fitment issues with this?

-Josh

Sponsored

 

[Dmk08]

I was thinking a set of 19" HRE R101 would be sick on this car. I had them on my M3 before I sold it. 19lb for the 19x11 rears...

 

[GT P-TREE]

I've done a lot of research because I want concave wheels, with a deep concave in the rear, and the options are super limited. It seems like the Project 6G and the best option at the moment (for my wants).

 

[Dmk08]

I've done a lot of research because I want concave wheels, with a deep concave in the rear, and the options are super limited. It seems like the Project 6G and the best option at the moment (for my wants).

There are plenty of wheel manufacturer that build to spec. HRE for instance will build you whatever you want. HRE are obviously on the pricey side though.

 

[nastang87xx]

HRE, Forgestar, Forgeline, BBS, CCW.

You'll have to contact them to get the fronts to fit correctly. The offset is very low.

 

[GT P-TREE]

HRE, Forgestar, Forgeline, BBS, CCW.

You'll have to contact them to get the fronts to fit correctly. The offset is very low.

They don't have the concave I want or can't have the concave due to the offset in the rear. Also looking at spending ~$500 man a wheel.

 

[Dmk08]

They don't have the concave I want or can't have the concave due to the offset in the rear. Also looking at spending ~$500 man a wheel.

HRE could definitely do it with concave but you're talking more 2-3k a wheel ;)

 

[GT P-TREE]

HRE could definitely do it with concave but you're talking more 2-3k a wheel ;)

Yea, pockets aren't that deep, lol

 

[GT_Dave]

If you run across any even close to that price range, post some info. I just got a quote for HRE RS105m wheels at $7,200 per set.
Classic 305m for $5760 per set - shipped.

 

[MELLOWYELLOW06]

Taken from the front page of the forums:

Shelby GT350/R “Project 6GR” Wheels

by admin • December 21, 2015 • Featured, News • Comments Off • 5524





Months ago, our friends at Need4Speed Motorsports were approached by a number of Shelby GT350 and GT350R owners looking for an R-spec version of the GT350R wheels both for GT350 owners looking to upgrade and for GT350R owners looking for a replacement for their stock carbon fiber wheels.
Born from this demand was “Project 6GR” with a simple developmental goal — “increase performance, decrease mass and look badass while doing it.”
For GT350/R owners, N4S developed a special R-spec edition wheel using the leading spun-forging technology processes on the market. The wheels are both strong and light, will be JWL and VIA certified and have fitments catered to the needs of these owners.

 

[Dmk08]

If you run across any even close to that price range, post some info. I just got a quote for HRE RS105m wheels at $7,200 per set.
Classic 305m for $5760 per set - shipped.

Im not sure about vendor rules on here so Ill just tell you to PM me if you want some contacts to price out HRE. I was able to get a set of 8800 MSRP R101 for around 6k.

 

[MELLOWYELLOW06]

Here are the 19x11.5 with 345/30/19 on the rear and 305 on a 11 in the front.

They will fit the 350 with no problems!

 

[swedensky]

God the wait for my wheels is killing me and you all are making it worse! Hahaha

 

[ir0nxchefx]

Any fitment issues with this?

-Josh

None at all, the tires are a 30 instead of a 35. HRE said if I stuck with a 35 tire, I would have issues.

 

[Shift]

Here are the 19x11.5 with 345/30/19 on the rear and 305 on a 11 in the front.

They will fit the 350 with no problems!

345 is massive!! Seems like your rears are sticking out a bit.

Sponsored