Question for you guys that Run a BAP

[desant89]

Is the consensus here that we do not need a BAP if under a certain amount of HP or boost? I am having a Whipple stage 2 with 72# injectors, a TB, and the 3.625 pulley. I DID buy a KB BAP, but will gladly not have it installed. I do not like reading about these things causing pumps to burn up. Thanks in advance!

Sponsored

 

[zaquhree]

Your tuner and datalogs will tell you if you need a BAP

 

[desant89]

Your tuner and datalogs will tell you if you need a BAP

Good call. Maybe I will have the SC installed without the BAP. Once the tuning starts, if I need it, I will add it. Honestly after reading all of this, I am kind of hoping I do not need it. Thanks!

 

[zaquhree]

Good call. Maybe I will have the SC installed without the BAP. Once the tuning starts, if I need it, I will add it. Honestly after reading all of this, I am kind of hoping I do not need it. Thanks!

You will be fine with the Whipple. The fuel demands are much different for a centri than that of a Whipple car.

 

[r1lovin]

You will be fine with the Whipple. The fuel demands are much different for a centri than that of a Whipple car.

Im in the same situation. Going to pulley down to 9-10 lbs on my h.o. kit and lund is telling me i might need a bap. But it would be great if i didnt need one. At what boost did you need a bap on your vortech?

 

[MyYellowPony]

I am not used to this forum but am in a bind. i installed an f1a on my GT and id1300s and ngk plugs and jus bap. once all was installed the car cranks but won't fire up. any ideas? car fired after PC install. car fired after spark plugs and injectors. then once bap was installed it would not fire. *car has not been tuned yet. just started and checked for any leaks of any sort.

 

[ProChargerTECH]

Old thread.

Sponsored