John577
Well-Known Member
Thank you very much for the link, will definitely give it a tryFound this in the Infotainment subforum...
http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6
Sponsored
Thank you very much for the link, will definitely give it a tryFound this in the Infotainment subforum...
http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6
Just FYI for others, according to the F150 spreadsheet, that only works on Sync 2/MFT and disables Sirius Travel Link.Found this in the Infotainment subforum...
http://www.mustang6g.com/forums/showpost.php?p=1822315&postcount=6
Actually I put 01 everywhere like [MENTION=28279]veeefour[/MENTION] did:
726-14-02 0101 0101 01XX
726-21-01 01XX XXXX XXXX
If I understand it correctly, this is for how long it takes before the headlamps are turned on when you enter a dark place such as a tunnel or a garage, or when it gets dark outside. This function is called Automatic Headlights (to put it correctly). What you are referring to is the amount of time that your lights stay on after exiting your vehicle. Anyway, I am a bit confused as well...
Maybe [MENTION=14834]John577[/MENTION] or [MENTION=28279]veeefour[/MENTION] can help us out on that. Do you guys have any feedback on that, like what it does exactly and what happens when you put 01 or 00 everywhere?
I don't think I see any difference either. I may revert it back to 14 everywhere when I return from my vacations.Hi guys,
I tried both 01 and 00 and it didn't work :-(
Does anyone have any news regarding this?
Thanks
Oh really ??Thought LC only came on manual cars?
Looking at the wiring diagrams, the power folding mirrors work without any module commands:Would like to see if there is a mirrors in when turning engine of function as we have the electronic folding mirrors already at the push of a button, so some form of command must already be present in the coding to allow this to happen (unless its a straight through circuit that does not require a computer command from switch to mirror) My 2014 KIA Sorento platinum had this feature and it was very helpful.
and would also like to see if their is any possible way to disable the tpms fault on the dash as im not running sensors atm. (considering tpms system runs from TPMS-RTM-BCM-GWM-MScan1-IPC some form of code must be in place to enable the function in the system therefore it must be able to be disabled).
might do some ground work on other forums and see if anything pops up.