vaeevictiss
Well-Known Member
- Thread starter
- #1
So i picked up the BMR rear bracing kit as well as the steeda alignment dowels. After fighting with my apparently horribly factory aligned IRS, and one cross threaded sub frame bolt later (took me an hour to carefully retap it) i managed to get all 4 subframe bolts in and centered.
The passenger side lock out however, one of the 2 little bolts doesn't line up.
Went to get my front braces on, again on the passenger side, neither of the smaller holes line up.
I know my irs is perfect now with the alignment dowels, so I have no idea what Else it could be other than manufacturing errors.
The car only has 15k miles, no accidents, so no way the frame/chassis should have gotten tweaked.
The passenger side lock out however, one of the 2 little bolts doesn't line up.
Went to get my front braces on, again on the passenger side, neither of the smaller holes line up.
I know my irs is perfect now with the alignment dowels, so I have no idea what Else it could be other than manufacturing errors.
The car only has 15k miles, no accidents, so no way the frame/chassis should have gotten tweaked.
Sponsored