88lx50
Well-Known Member
Good luck with the hurricane. Hopefully it passes without incident.It's always hot here lol. I might be delayed because of this hurricane though. Hopefully everyone is just blowing it out proportion.
Sponsored
Good luck with the hurricane. Hopefully it passes without incident.It's always hot here lol. I might be delayed because of this hurricane though. Hopefully everyone is just blowing it out proportion.
Would the active exhaust muffler part numbers be different for a convertible vs. a fastback? There is additional bracing on the convertible so I suspect there are some different bends around the axle area.I'd be interested in this too. My friend hasn't found the harness yet, I'll probably ping him on that again today to see if he has any more time to devote to finding it.
He did find the part number for the actuator pair, but there was no price for it so it might not be available yet/not at all?
JR3Z-5K245-B is the part for the actuator pair.
The mufflers, as have already been posted I think are:
JR3Z-5230-FA
JR3Z-5230-FB
Just need that harness. I also need to find myself some actuators, but that's another story.
I appreciate it. It made a hook to the right and missed my area. I can't complain.Good luck with the hurricane. Hopefully it passes without incident.
I just changed the code on my car. I still haven't installed the mufflers so I get active exhaust not available. Gotta get the mufflers on this week.Just finished installing the active exhaust on my 18 PP2, everything works like factory. Plug and play long as you have the harness. Here is the line of code to change in the IPC module if you have a standard cluster.
Inactive code: 720-10-01 0xxx xxxx xxxx
Active code: 720-10-01 2xxx xxxx xxxx
I kind of doubt it, but I suppose it's possible.Would the active exhaust muffler part numbers be different for a convertible vs. a fastback? There is additional bracing on the convertible so I suspect there are some different bends around the axle area.
I just confirmed my 400A PP1 Convertible has the 12 pin plug for the actuators... So I'm set once I know if the part numbers are the same or different...
Not yet, was going to do some digging this weekend, but...rain. And my garage is full of a torn apart fox.any luck with the harness for the GTs without the plug ready?
I think they are the same.I kind of doubt it, but I suppose it's possible.
No plug on my 400a either..
There is an ongoing effort for us guys that don't have the harness from the factory. @FISHTAIL is looking into the specifics of the wiring in the driver's footwell that (I believe) all 18's have. Hopefully this will just require running a harness down the length of the vehicle and maybe out of the trunk and to the mufflers. @HextailS550 has also shown some interest in creating a solution for us. Right now I'd just love to get a solid idea of who has the wiring and who doesn't. I believe 18's with one of the following: Safe&Smart, Magneride, or Shaker Pro will have the harness, and those without any won't. But that's just a guess from what I've seen here.Just checked, my 400A doesn't have the plug unfortunately so I guess I have to come up with another option. I saw Roush offers their iOS Lite axle back that comes with the servos and a harness with a toggle switch to open/close but at $1,700 I think I'm going to try and come up with a better option lol .
I have a 400A convertible. No magneride or safe and smart, but I do have the Shaker pro.There is an ongoing effort for us guys that don't have the harness from the factory. @FISHTAIL is looking into the specifics of the wiring in the driver's footwell that (I believe) all 18's have. Hopefully this will just require running a harness down the length of the vehicle and maybe out of the trunk and to the mufflers. @HextailS550 has also shown some interest in creating a solution for us. Right now I'd just love to get a solid idea of who has the wiring and who doesn't. I believe 18's with one of the following: Safe&Smart, Magneride, or Shaker Pro will have the harness, and those without any won't. But that's just a guess from what I've seen here.
@88lx50 , How is your car equipped?
I have an '18 GT Premium PP1 convertible (no safe&smart, no magneride, and no shaker) - I DO have the 12 pin plug for the variable exhaustThere is an ongoing effort for us guys that don't have the harness from the factory. @FISHTAIL is looking into the specifics of the wiring in the driver's footwell that (I believe) all 18's have. Hopefully this will just require running a harness down the length of the vehicle and maybe out of the trunk and to the mufflers. @HextailS550 has also shown some interest in creating a solution for us. Right now I'd just love to get a solid idea of who has the wiring and who doesn't. I believe 18's with one of the following: Safe&Smart, Magneride, or Shaker Pro will have the harness, and those without any won't. But that's just a guess from what I've seen here.
@88lx50 , How is your car equipped?
Yeah, that's my plan. I bought a used F150 last weekend though and it's been a huge time suck. I hate buying used stuff, but wasn't going to drop the cash on a new one. So I'm having to work my way through all the maintenance on the thing just so I know where I'm starting from...plus fixing a few nagging issues. Hoping to get caught up here soon, then once I get this problem sorted I need to swap the K-member on my fox so I can throw the new engine in. *sigh*. I need a clone.There is an ongoing effort for us guys that don't have the harness from the factory. @FISHTAIL is looking into the specifics of the wiring in the driver's footwell that (I believe) all 18's have. Hopefully this will just require running a harness down the length of the vehicle and maybe out of the trunk and to the mufflers. @HextailS550 has also shown some interest in creating a solution for us. Right now I'd just love to get a solid idea of who has the wiring and who doesn't. I believe 18's with one of the following: Safe&Smart, Magneride, or Shaker Pro will have the harness, and those without any won't. But that's just a guess from what I've seen here.
@88lx50 , How is your car equipped?
I have an '18 GT Premium PP1 convertible (no safe&smart, no magneride, and no shaker) - I DO have the 12 pin plug for the variable exhaust