dn1984
Well-Known Member
- Joined
- Sep 14, 2019
- Threads
- 27
- Messages
- 818
- Reaction score
- 722
- Location
- SF Bay Area
- Vehicle(s)
- 2018 Mustang GT A10 Premium
- Thread starter
- #1
Ok so first of all I'm lowered about 1.25" front and rear. I want wider wheels so I'm looking at sets. I'm not worried about rear fitment but front I'm not sure about. The sets I'm looking at are 19x10 for the front wheels, backspace 9.88" and offset +35mm
My question is this. To save cost I may use my existing 275/40/19 rear tires and swap them to the front of the new wheels. Will I have rubbing issues from a too tall tire? I'm seeing most people go 275/35 or 285/35
I'm on the factory non-PP brakes and have Steeda extended ball joints as well
Forgot to mention I have about 1.8 to 2 degrees of negative camber up front
My question is this. To save cost I may use my existing 275/40/19 rear tires and swap them to the front of the new wheels. Will I have rubbing issues from a too tall tire? I'm seeing most people go 275/35 or 285/35
I'm on the factory non-PP brakes and have Steeda extended ball joints as well
Forgot to mention I have about 1.8 to 2 degrees of negative camber up front
Sponsored
