What can we do for You?

[Sariandan]

Hmm, this is what I am thinking based on your photo and photos of the cover itself

With that said here are the qty's and links

1 Cover
https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-fr3z6a949c

3 Studs
https://parts.levittownfordparts.com/oem-parts/ford-stud-w717107s450b

3 Nuts
https://parts.levittownfordparts.com/oem-parts/ford-condenser-nut-w520412s441

1 Bolt
https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-bolt-w700805s450b

I will send you a code you can use. Please let me know if you have any questions.
Thanks,
-Benny

Welcome Kevin,
PM sent

Please let me know if you have any other questions.
Thanks,
-Benny

I ordered the parts you listed. I don't believe the engine studs are correct. After attempting to install the cover, I checked a few videos for 2015+ ecoboost mustangs. Whenever one was removed, the stud looked more like this one:

There were two, one each in the front right and rear left, then two bolts, one each in the front left and the rear right.

Can you advise if this is the actual hardware needed?

Sponsored

 

[RobZ71LM7]

Hi Benny,

Do you have a code I can use to purchase the Mach 1 lower splitter part number MR3Z-17626-AA?

https://www.levittownfordparts.com/sku/mr3z-17626-aa.html

 

[LevittownFordParts]

I ordered the parts you listed. I don't believe the engine studs are correct. After attempting to install the cover, I checked a few videos for 2015+ ecoboost mustangs. Whenever one was removed, the stud looked more like this one:

There were two, one each in the front right and rear left, then two bolts, one each in the front left and the rear right.

Can you advise if this is the actual hardware needed?

Hi,

To confirm the stud I recommended is -W717107-S450B and looks like this

In the previous diagram this is noted as "HT1" and shows that it is used for the cover.



There is another stud shown on the front that is # AG9Z-00812-D and looks like this

Is that the one you are seeing in the vids?

- Benny

 

[LevittownFordParts]

Hi Benny,

Do you have a code I can use to purchase the Mach 1 lower splitter part number MR3Z-17626-AA?

https://www.levittownfordparts.com/sku/mr3z-17626-aa.html

Hi,
We do , I will PM you now

- Benny

 

[Sariandan]

Hi,

To confirm the stud I recommended is -W717107-S450B and looks like this

In the previous diagram this is noted as "HT1" and shows that it is used for the cover.



There is another stud shown on the front that is # AG9Z-00812-D and looks like this

Is that the one you are seeing in the vids?

- Benny

No, sir. They look like the ones in this illustration.

I’ll let you know how these work out when I get them.

 

[LevittownFordParts]

Hmm, I don't see any others then the 2 pics I posted above. Here is the diagram I am working off of

Based on the connecting line you see with HT1 to the cover Nut is why I recommended this part number.

- Benny

 

[Sariandan]

Hmm, I don't see any others then the 2 pics I posted above. Here is the diagram I am working off of

Based on the connecting line you see with HT1 to the cover Nut is why I recommended this part number.

- Benny

Here is what I'm seeing and what I believe is needed. The part I posted above is only a double-threaded stud, without all the plastic bushing or whatever around it. When the guy in this video removes the stud, it looks exactly like what I posted. It's the same type of stud used on the Ranger engine cover, if that helps.

 

[LevittownFordParts]

Here is what I'm seeing and what I believe is needed. The part I posted above is only a double-threaded stud, without all the plastic bushing or whatever around it. When the guy in this video removes the stud, it looks exactly like what I posted. It's the same type of stud used on the Ranger engine cover, if that helps.

I am not having any luck locating that stud. Its not shown in the intake manifold section either. You mentioned its similar to the Ranger cover stud, That part # is https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-stud-w714647s450b
The nut used on the Mustang is an M6 and so is the stud so I do believe it will work.

-Benny

 

[Sariandan]

I am not having any luck locating that stud. Its not shown in the intake manifold section either. You mentioned its similar to the Ranger cover stud, That part # is https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-stud-w714647s450b
The nut used on the Mustang is an M6 and so is the stud so I do believe it will work.

-Benny

What's really weird is that the picture changes for the same part number, depending on what vehicle you have set as "your vehicle" when searching. So, I ordered the part shown for the 2021 Mustang, but wonder if I'll get the other part. This seems like a problem with the parts system.

 

[LevittownFordParts]

What's really weird is that the picture changes for the same part number, depending on what vehicle you have set as "your vehicle" when searching. So, I ordered the part shown for the 2021 Mustang, but wonder if I'll get the other part. This seems like a problem with the parts system.

That is odd, I updated the image for the part https://parts.levittownfordparts.com/oem-parts/ford-engine-valve-cover-grommet-ag9z00812d

Based on our discussion this is not the correct one you need

- Benny

 

[Sariandan]

That is odd, I updated the image for the part https://parts.levittownfordparts.com/oem-parts/ford-engine-valve-cover-grommet-ag9z00812d

Based on our discussion this is not the correct one you need

- Benny

Okay. So what do I need to do? I have ordered, based on the picture that was there. I got the shipping notification today. Any way to stop it and get the correct pieces in there? It's order #517841, if anything can be done.

 

[LevittownFordParts]

Okay. So what do I need to do? I have ordered, based on the picture that was there. I got the shipping notification today. Any way to stop it and get the correct pieces in there? It's order #517841, if anything can be done.

I have sent a note over to shipping to stop this but it may be too late. Based on your photos I think the Ranger stud would be the best option https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-stud-w714647s450b

- Benny

 

[Sariandan]

I have sent a note over to shipping to stop this but it may be too late. Based on your photos I think the Ranger stud would be the best option https://parts.levittownfordparts.com/oem-parts/ford-engine-cover-stud-w714647s450b

- Benny

I appreciate the help. If it doesn't get caught in time, we'll figure something out. I'm in an apartment building where everything gets delivered to an Amazon Hub though, so I can't decline the package when they try to deliver it.

I'll order the ranger studs after the holiday and give them a try. Thanks!

 

[LevittownFordParts]

I appreciate the help. If it doesn't get caught in time, we'll figure something out. I'm in an apartment building where everything gets delivered to an Amazon Hub though, so I can't decline the package when they try to deliver it.

I'll order the ranger studs after the holiday and give them a try. Thanks!

Agreed, At the least hold off until I hear back from our shipping dept. tomorrow.

Thanks,
- Benny

 

[LevittownFordParts]

I appreciate the help. If it doesn't get caught in time, we'll figure something out. I'm in an apartment building where everything gets delivered to an Amazon Hub though, so I can't decline the package when they try to deliver it.

I'll order the ranger studs after the holiday and give them a try. Thanks!

It was too late for our shippers to pull this package yesterday as it was picked up by UPS after they had gone home for the day.

-Benny

Sponsored