Washington Vorshlag Camber Plates - Steeda Spherical Bushings + Toe Links + Diff Bushings

[Bullitt_3461]

I'm very active on Instagram - faster response if messaged there - screen name is "Mach_Mane"
Hi All, these parts were meant for my 2019 Bullitt but I decided to sell it after spending more time in my 2022 Mach 1.
All parts brand new and never used and I can ship easily.
Vorschlag Camber Plates for Magneride S550 SOLD
Steeda Spherical Bushings $225 OBO
Steeda Toe Links $300 OBO
Steeda Diff Bushings SOLD
2015-2023 Ford Mustang Rear Lower Control Arms $300 OBO - acquired in 2020 during the pandemic, the thought was to install the spherical bearings in these while off the car to make the install faster - you can just swap out the lower control arms instead of having to drive and take them to a machine shop to have the bearings pressed in, saving a ton of time. Then you can sell or keep your factory lower control arms.

Sponsored

 

[monte87]

I'm very active on Instagram - faster response if messaged there - screen name is "Mach_Mane"
Hi All, these parts were meant for my 2019 Bullitt but I decided to sell it after spending more time in my 2022 Mach 1.
All parts brand new and never used and I can ship easily.
Vorschlag Camber Plates for Magneride S550 $500 OBO
Steeda Spherical Bushings $225 OBO
Steeda Toe Links $300 OBO
Steeda Diff Bushings $125 OBO
2015-2023 Ford Mustang Rear Lower Control Arms $800 OBO - acquired in 2020 during the pandemic, the thought was to install the spherical bearings in these while off the car to make the install faster - you can just swap out the lower control arms instead of having to drive and take them to a machine shop to have the bearings pressed in, saving a ton of time. Then you can sell or keep your factory lower control arms.

I've totaled these parts up and it's around $2400 worth of parts brand new, willing to let it go as a package for $1750 OBO.
If interested in parting it out just let me know here as long as the mods are nice enough to keep the post open I'll break it up into parts.

How much for the just the lower control arms?? Those 4 bushings are already installed right??? Straight u lug and play?
Thanks Anthony

 

[Bullitt_3461]

How much for the just the lower control arms?? Those 4 bushings are already installed right??? Straight u lug and play?
Thanks Anthony

Hi responded to you via PM!

 

[Bullitt_3461]

Pricing has been updated.

 

[Bullitt_3461]

Diff Bushings Sold on FB Marketplace to someone in Oregon, shipping out tomorrow.

Original Post Updated

 

[Mach 1 Pilot]

Do you still have these (camber plates specifically)?

 

[Bullitt_3461]

Do you still have these (camber plates specifically)?

Sorry for the late reply. Yes I still have the camber plates. I have updated the original post.

Prices are OBO and I really need this stuff gone, just make an offer and I'll ship it out.

Also as mentioned previously, Instagram is the best way to get in touch with me, my IG handle is in my sig block. I'm very active on there.

 

[Bullitt_3461]

Camber plates sold and shipped!

 

[Mach 1 Pilot]

Ive been in a buying mood lately.... Bullitt made me a great deal on the Vorshag camber plates... Thanks!

 

[NGOT8R]

Won’t all or most of those parts fit your Mach 1? Just curious, to know if the M1 suspension far superior than what can be achieved with those parts?

 

[Mach 1 Pilot]

If the question was for me, yes this all would fit the Mach 1 (except the LCAs, as they are not tapped for the Magneride sensors. I only bought the camber plates as I already had everything else. Good deal if you need the rest!

 

[NGOT8R]

If the question was for me, yes this all would fit the Mach 1 (except the LCAs, as they are not tapped for the Magneride sensors. I only bought the camber plates as I already had everything else. Good deal if you need the rest!

I gotcha. I’ll tell my buddy about these parts to see if he might be interested in some of them. He’s got a 2022 M1.

 

[Bullitt_3461]

Won’t all or most of those parts fit your Mach 1? Just curious, to know if the M1 suspension far superior than what can be achieved with those parts?

These were for my Bullitt, that I sold since I acquired the Mach.

The camber plates are WAY nicer than the Ford plates, it's like dollar store versus Tiffany's.

The Mach 1 has the GT500 subframe and the deflection isn't as drastic as if you had a stock GT. If you were to install all of this it would be better than the Mach but only marginally.

The only thing for sale is the lower control arms, Steeda control arm bushings, and adjustable toe links.

 

[NGOT8R]

These were for my Bullitt, that I sold since I acquired the Mach.

The camber plates are WAY nicer than the Ford plates, it's like dollar store versus Tiffany's.

The Mach 1 has the GT500 subframe and the deflection isn't as drastic as if you had a stock GT. If you were to install all of this it would be better than the Mach but only marginally.

The only thing for sale is the lower control arms, Steeda control arm bushings, and adjustable toe links.

Those are all great parts. I have them and much more installed on my Bullitt. GLWS

Sponsored