trouble code while loading intune

[craigsix]

has anybody else had trouble while loading a tune? after i finished loading 93 octane diablosport intune tune car would die as soon as i put it in reverse or drive and said something like hillclimb assist not working. i uninstalled tune and it ran fine with stock. so i reloaded the 93 tune with no parameters changed and it runs fine but check engine lite was on code po68a ecm/pcm power relay de-energized to early. thanks car is running great i put on a gibson catback and k&n filter today.

Sponsored

 

[bluebeastsrt]

Run the tune again. Make sure everything is turned off. Radio. Climate control. Everything. I had this issue with the SCT X4 and it took after I turned off everything in the car.

 

[craigsix]

Run the tune again. Make sure everything is turned off. Radio. Climate control. Everything. I had this issue with the SCT X4 and it took after I turned off everything in the car.

i had the windows down and everything off. it did take the tune the second time but im afraid to mess with the parameters for now. getting my airraid mit thursday ill drive it for a couple weeks and see how the tune adapts. thanks

 

[Nazgul]

When you load a tune make sure your battery charger is on too.

 

[craigsix]

When you load a tune make sure your battery charger is on too.

ok so put a charger on the battery while im loading a tune? i saw when i researched the code some people charged their battery but not while they wre tuning. thanks

 

[RubyRedBoost]

When you load the custom tune you are supposed to adjust your own parameters. Its already in the tune. Dont worry about the fault code it isnt an issue just clear it and enjoy the tune.

 

[madweazl]

While loading one of the SCT tunes this week I kept getting a cross traffic warning fault. I thought it was kind of funny. Everything was fine after the flash was complete.

 

[craigsix]

tech at diablosport said go to stock tune and touch battery terminals for 15 seconds. did that and took 93 tune with no trouble lite but if i try quik adjust or change parameters car either wont start or starts and dies when i put in a gear and says hillclimb assist not activated. so rite now im stuck with the 93 cantune no adjustments.

 

[craigsix]

got it figured out the intune needed to be updated thru diablosport to a exe file on my computer took about 45 minutes but it was worth it. happy birthday to me! thanks for the help.

 

[madweazl]

When you load a tune make sure your battery charger is on too.

I've seen this posted a number of times and after flashing at least 10 tunes over the last week, I have to ask, why? Flashing via the SCT takes a max of 10 minutes. After the flash, I havent even noticed a .1v difference in battery voltage (taken before and after).

With that being said, why are you guys recommending it go on the charger? DC voltage from the battery is far more reliable than the charger. Is this a precaution or are you guys actually seeing large voltage drops?

Sponsored