Coyote 2121
Well-Known Member
- Thread starter
- #16
Thanks for the detailed answer and the example of the water beads.Kyle: First off, in my limited experience with ceramic, dust doesn't care. :-) I'm down in Corpus and it's pretty windy most of the time. I try to keep the garage doors closed but you know how that is. Anyway, mine gets dusty in one day.
As to whether you're dealing with a coated vehicle or not, the previous posters are on the right track with beading and sheeting water. But, I'm guessing that the seller told the store it was coated and that would be a selling point. Consequently, I would have thought that they'd brag about that during the negotiations.
Bottom line, if you can't get water to lie flat with a hose, it either has a ton of wax or, it was coated. You could probably take it to a PPF shop and ask them to check for ceramic. (Film won't stick well to it and they know that you have to polish the coating off before applying film.) So, they may be able to tell you.
Bottom line. If it is coated, it will last much longer than a wax job so just keep an eye on things when rinsing.
In any case, enjoy it until it wears off.![]()
As an example of ceramic beading, here's my roof after a rinse. With a coating, it is impossible to get water to lie flat.
![]()
Yeah, the dealership I bought it from didn't even look in the trunk, much less pitch whether it was coated or not!
It had a full set of katzkin leather seat covers back there, and an X pipe I just discovered the other day.
Had 2% tint all around and about 25% on the windshield.
Of course THAT had to come off.
So the previous owner spent some money on it for only putting 2980 miles on the clock.
And yeah, Corpus is windy alright.
I've learned to never wear my favorite ball cap down there!
Sponsored