Tennessee/Middle TN

[brandonalberd]

Taylor is the man. He tuned my set up.
Red - Procharger D1SC, Sai Li Fuel System, id1050x, E85
Green - Procharger D1SC, Sai Li Fuel System, id1050x, E85, ARH Kittyless - Performance Tune
Pink - Procharger D1SC, Sai Li Fuel System, id1050x, E85, ARH Kittyless - Race Tune

How involved is the fuel system install? For what I want, Sai Li's kit would work fine! Believe it's what, 1000HP capable? I'd be happy with around 800WHP.

Sponsored

 

[Dizzle58]

Taylor is the man. He tuned my set up.
Red - Procharger D1SC, Sai Li Fuel System, id1050x, E85
Green - Procharger D1SC, Sai Li Fuel System, id1050x, E85, ARH Kittyless - Performance Tune
Pink - Procharger D1SC, Sai Li Fuel System, id1050x, E85, ARH Kittyless - Race Tune

Jesus Don! You have been busy! I need to ride in this joker now :lol:

 

[brandonalberd]

Don, what is your exhaust setup? Headers and Fuel System are next on my list so. I'm going either Stainless Works or ARH. Haven't decided ha.

 

[NOM3RC]

How involved is the fuel system install? For what I want, Sai Li's kit would work fine! Believe it's what, 1000HP capable? I'd be happy with around 800WHP.

From what I heard the Sai Li kit is straight forward. I had 5th Gear Automotive install it while they were doing some other work for me, so I don't have first had experience. I think it's good for around 900-1000.

 

[NOM3RC]

Don, what is your exhaust setup? Headers and Fuel System are next on my list so. I'm going either Stainless Works or ARH. Haven't decided ha.

Corsa Xtreme and ARH Catless with Corsa Connect. It's Xtremely loud now. :lol:

 

[brandonalberd]

I bet! That's what I run now ( Corsa Sport Axleback, FRPP X Pipe Res Delete ) and it's not bad, but nothing like what I had on my 2013. SW 1-7/8" LT, 3" X, Catless, Lethal Overaxle Pipes and Borla S-Type.

 

[brandonalberd]

Longtubes, Fuel System and OPG/CG are what's on my list next. Then a 3.5 pulley. Probably stay on pump gas since E85 is scarce here. One station in town HAD it, but hasn't for some time now. And there is one around 15-20 miles from me that has it. But it always tested low af.

 

[DarkSubRosa]

I had a white slammed performance pack S550 try picking on me in my RS tonight during break in... smh

 

[Dizzle58]

OK everyone....mod day at my house next weekend! If you have something to install or just wanna come hang out..it's going down. Let me know if your interested and I will get you my address

 

[DarkSubRosa]

Speaking of Fuel Systems I'm going with the CJ Motorsports Fore setup. Good for as low as 700 hp and high as 1400 hp. It's a super nice kit.

 

[DarkSubRosa]

Longtubes, Fuel System and OPG/CG are what's on my list next. Then a 3.5 pulley. Probably stay on pump gas since E85 is scarce here. One station in town HAD it, but hasn't for some time now. And there is one around 15-20 miles from me that has it. But it always tested low af.

Probably want to consider the 10 Rib kit if you go to 3.5. That's the pulley I'll be running and Will from Whipple said that's about borderline for the 6 rib. I should be around 850 whp on pump and over 1k on race.

 

[brandonalberd]

Speaking of Fuel Systems I'm going with the CJ Motorsports Fore setup. Good for as low as 700 hp and high as 1400 hp. It's a super nice kit.

Might look into the Sai Li System. Twin GT500 pumps I believe. Plug and play. Good for 1000WHP. Believe it's like $875

 

[brandonalberd]

Probably want to consider the 10 Rib kit if you go to 3.5. That's the pulley I'll be running and Will from Whipple said that's about borderline for the 6 rib. I should be around 850 whp on pump and over 1k on race.

Ken @ PBD won't tune the 3.5 pulley on 93. Even with a fuel system. Says it's too aggressive. Said the 3.625 pulley should easily be 800whp on E85. Saw Dyno sheets of a guy making 700+ wheel on a 3.625 on 93

 

[DarkSubRosa]

Might look into the Sai Li System. Twin GT500 pumps I believe. Plug and play. Good for 1000WHP. Believe it's like $875

I'll be over 1k on race ;)

Ken @ PBD won't tune the 3.5 pulley on 93. Even with a fuel system. Says it's too aggressive. Said the 3.625 pulley should easily be 800whp on E85. Saw Dyno sheets of a guy making 700+ wheel on a 3.625 on 93

I dunno, I'm having Whipple themselves handle all of that and my engine build comes with a warranty so I trust what Will is telling me directly from Whipple. I'll be on the 3.5 pulley on pump.

 

[Nick]

Alright my local friends. Time for you to get some deals! I'm parting out, LOCALS PICKUP ONLY, some stuff has dibs already so send me a message quickly if you want something and we can haggle prices. Anything with PENDING next to it you'll have to wait and see how the pending sale works out. Still send me a message and I'll go in the order they were received. Here's the stuff, everything is OBO:

GT350R Steering wheel - PENDING

Steeda Tower Brace - PENDING

Ford Racing Panel - PENDING

Automatic Shifter Paddle Extentions - PENDING

Carbon Fiber Vinyl Wrapped Steering Wheel Bezels - $50

Project 6GR Wheels (Gloss Black) (19x10/11) and Bridgestone Potenza Tires (275/305/30) - TRADE plus CASH or $2,000 CASH

SCTX4 - $250

Vossen CVTs 20x10 - $1200

TSW Nurburgrings 18/9.5/10 - $700

Borla Atak Catback Exhaust - TRADE plus CASH

GT350 Track Pack Wing (Authentic Ford) - $350

Anderson Composites GT350R Replica Carbon Fiber Wing - $500

MMD GT350R Replica Front Splitter - $100 - PENDING

Steeda Delrin Shift Collar - $25 (No O-Ring)

Diode Dynamics Switchbacks - $30

Diode Dynamics Sequential Taillights - $50

Maximum Motorsports Camber Plates - $180

Sponsored