Suspension pieces compared

[smitty]

I recently purchased the take off suspension from a 2016 ppGT. I am pairing these pieces with the frpp x springs and jounce dampers. I assume this equates to the street pack sold as a kit by ford racing. I thought I read somewhere that the front sway bar of the pp suspension and the standard GT are the same. Could someone verify if this is true. I don't want to waste my time changing the front bar if it isn't necessary. Thanks

Sponsored

 

[IvanCRF]

The front swaybars of the base and PP are the same diameter (32mm). The difference is that the PP front swaybar has stiffer mounts over the base model.

The rear swaybar of the PP is .5mm larger in diameter than the base model's rear swaybar (22.2mm vs 21.7mm).

The "Free Front Swaybar Mod" is something to consider on either front swaybar.

 

[smitty]

So it sounds like I could just swap the mounts and the rear bar assuming both front bars are the same stiffness. That would be a little less work than finagling the old bar out and the new one in.

Rats!!! Went downstairs to look and the bushings are not removable from the bar. Looks like a bit of finagling IS in my future :frusty:

Sponsored