Super Aggresive Tire Question

[derieuz]

Anyone squeeze a 325/30/20 on a 20x11 rear rim by any chance?

Also, has anyone squeezed a 295/30/19 on a 19x10 rim on the front?

If so, can you post pictures? Thank you!

Sponsored

 

[Cloak]

I like where you're going with this

I'm running 275/35R20 front and 315/35R20 rear. You would most likely need slight fender pull to fit 325s out back.

 

[Need4SpeedMotors]

that's aggressive what offsets for the wheels.

 

[derieuz]

that's aggressive what offsets for the wheels.

I'm just wondering if there are wheels with the perfect offsets to fit the tires I specified above with normal camber and not stance camber

 

[Need4SpeedMotors]

Well for a 20x11 ET is normally 55

now going to tire sizes

Nitto Invo 315/35/20 overall diameter is 28.62"

Dunlop Sp 325/30/20 overall diameter is 27.7"

I have done a 325/30/19 Hankook K120 on the new MRR M350 19x11 ET 55 and that was overall diameter of 26.7" with room to spare

so thats being said it could be done with clearance you would just need to try it to be honest brotha.

 

[D3adch1ld]

Well for a 20x11 ET is normally 55

now going to tire sizes

Nitto Invo 315/35/20 overall diameter is 28.62"

Dunlop Sp 325/30/20 overall diameter is 27.7"

I have done a 325/30/19 Hankook K120 on the new MRR M350 19x11 ET 55 and that was overall diameter of 26.7" with room to spare

so thats being said it could be done with clearance you would just need to try it to be honest brotha.

Yes, this is what Paul & I have been going over for months. I think I'm about to become the first guinea pig! Although on the front we are going for 285/35 19, that is 26.9" vs the OE PP 27" so I like the idea of staying close to spec height. Also don't want the fronts to look like they have more tire (wall height)

Sponsored