Steeda Billet Shock Mount with Viking Crusader Shock

[Mechanicus5.0]

So looking for some install pics or video pertaining to installing the following parts together:

Viking Rear Shocks Crusader, Part number: B358AJ
Steeda Billet Mustang Shock mount, Part number: 555-8151

Steeda's instructions has it with their specific Steeda brand shock or stock shocks.

Only way I could get it to work was by removing and not re-installing the O-ring and C-clip from the Viking shock.

Just want to make sure I installed the top portion correctly. Unable to locate a video or thread in regards to these two specific parts together. Thanks in advance!

Sponsored

 

[Mechanicus5.0]

Alright, I believe I have figured it out.

Need to remove both the C-clip and the O-ring from the Viking Crusader shock in order to have plenty of thread for the Nyloc Nut.

 

[KellTrac]

Yes, you remove and discard the snap ring.

Once you do, the Viking mimics the stock shock on terms of mounting.

Sponsored