Server Upgraded: Lost Posts

[Jarstang]

Hello everyone, we've just upgraded the server so some posts from this morning have been lost. Sorry for any inconvenience, but the good news is that this will increase site stability and speed.

Note: The search index is still being rebuilt, so search results and your content page will be blank/incomplete until rebuild is finished.

If you should experience any unexpected issues, please reach out to us via the Contact Us link at the bottom of the site.

Sponsored

 

[Jarstang]

P.S. If anyone has an alert bubble that they can't clear, try this solution:

1) open your full alerts page: https://www.mustang6g.com/forums/account/alerts?show_only=all

2) scroll down to the bottom of this page and click on "select all" and "Mark read" then click "Go". This should hopefully clear your alert bubble.

3) if that didn't work, repeat step #2 for all successive alert pages (if you have any) - i.e. pages 2, 3, etc..

 

[Fordphanatic]

P.S. If anyone has an alert bubble that they can't clear, try this solution:

1) open your full alerts page: https://www.mustang6g.com/forums/account/alerts?show_only=all

2) scroll down to the bottom of this page and click on "select all" and "Mark read" then click "Go". This should hopefully clear your alert bubble.

3) if that didn't work, repeat step #2 for all successive alert pages (if you have any) - i.e. pages 2, 3, etc..

That worked for me. Thanks

 

[ORRadtech]

P.S. If anyone has an alert bubble that they can't clear, try this solution:

1) open your full alerts page: https://www.mustang6g.com/forums/account/alerts?show_only=all

2) scroll down to the bottom of this page and click on "select all" and "Mark read" then click "Go". This should hopefully clear your alert bubble.

3) if that didn't work, repeat step #2 for all successive alert pages (if you have any) - i.e. pages 2, 3, etc..

I tried that yesterday and it didn't work.
I tried again this morning and it still didn't work. But this time I get an error something like "Ooops, we ran into a problem. Please select a valid action to perform."

 

[Jarstang]

I tried that yesterday and it didn't work.
I tried again this morning and it still didn't work. But this time I get an error something like "Ooops, we ran into a problem. Please select a valid action to perform."

I just performed the above suggested action for your account and it worked - your alert bubble should now be gone.

 

[ORRadtech]

I tried that yesterday and it didn't work.
I tried again this morning and it still didn't work. But this time I get an error something like "Ooops, we ran into a problem. Please select a valid action to perform."

Oddly, even with the error message and not clearing, after going to a new alert and leaving that thread after reading the latest post, my alert bubble cleared itself.
So success in a round about way.

Edit; thank you Jarstang.

 

[MAGS1]

@Jarstang can you clear my alerts out? I’ve tried a few times and it’s still showing I have unread messages even though I’ve read them all. Thanks

 

[Jarstang]

@Jarstang can you clear my alerts out? I’ve tried a few times and it’s still showing I have unread messages even though I’ve read them all. Thanks

Done!

 

[MAGS1]

Done!

Thank you!

Sponsored