Replacement dash panel

[zack.whitford]

Does anyone know where I could get a replacement dash panel for the Bullitt? I’m referring to the faux brushed metal silver piece that stretches from above the center console to the passenger side.

Sponsored

 

[derklink]

Hmmm...I looked around and not much on the interwebs. Dealership is probably your best bet. CJ Pony Parts is offering the previous gen trim https://www.cjponyparts.com/ford-da...uminum-bullitt-2008-mustang-2005-2009/p/DTBA/ maybe they can point you in the right direction.
This one is listed as Bullitt compatiblebut also Ecoboost and GT haha https://parts.roeschford.com/oem-pa...MI1JznrO7s7AIVjYbACh0vWQfVEAQYDCABEgLgwfD_BwE good luck with the search! By the way, what happened to yours?

 

[zack.whitford]

Hmmm...I looked around and not much on the interwebs. Dealership is probably your best bet. CJ Pony Parts is offering the previous gen trim https://www.cjponyparts.com/ford-da...uminum-bullitt-2008-mustang-2005-2009/p/DTBA/ maybe they can point you in the right direction.
This one is listed as Bullitt compatiblebut also Ecoboost and GT haha https://parts.roeschford.com/oem-pa...MI1JznrO7s7AIVjYbACh0vWQfVEAQYDCABEgLgwfD_BwE good luck with the search! By the way, what happened to yours?

Thanks so much for the help! I wonder if that second link is what I need.. I'll have to reach out to a dealer and confirm.

I had removed mine to install the GT350 Oil Temp gauge and was in the process of repairing a crack in the plastic of the Shelby gauge pod when a glob of Gorilla Glue landed on the dash panel. Problem was I didn't notice until much later and it had dried. I was able to get the glue off with some acetone but it had sat long enough that the glue took some of the finish off of the panel. It's no big deal, just a big ugly mark that I'd rather not be there.

 

[NGOT8R]

I’ve had to order a couple of replacement panels from the dealership for my Bullitt (A-pillar covers and left kick panel cover). The dealer will just need the last 8 digits of your VIN to get you taken care of. It took less than a week for my parts to arrive.

 

[derklink]

I hear you, once you see it, you can't unsee it, haha. A dealer should be able to source you the right one if their parts department is decent. I just got my Bullitt this week and am also thinking about getting and installing the oil temp gauge. I believe it doesn't pick up the various mycolor-colors though?

 

[aileron]

I believe it doesn't pick up the various mycolor-colors though?

Exactly; the GT350 gages are always white. After 10 minutes at night you'll forget about it and never give it a second thought.

 

[zack.whitford]

Thanks for the help, everyone. The parts department at the dealer where I have my service work done was more than helpful and the replacement panel is on the way.

 

[Gregs24]

Thanks so much for the help! I wonder if that second link is what I need.. I'll have to reach out to a dealer and confirm.

I had removed mine to install the GT350 Oil Temp gauge and was in the process of repairing a crack in the plastic of the Shelby gauge pod when a glob of Gorilla Glue landed on the dash panel. Problem was I didn't notice until much later and it had dried. I was able to get the glue off with some acetone but it had sat long enough that the glue took some of the finish off of the panel. It's no big deal, just a big ugly mark that I'd rather not be there.

Just an idea but what about a vinyl wrap on it of some sort ?

 

[Elp_jc]

Thanks for the help, everyone. The parts department at the dealer where I have my service work done was more than helpful and the replacement panel is on the way.

How much was the damage?

 

[zack.whitford]

How much was the damage?

About $300.

Sponsored