Recommend me some track wheels

[shogun32]

I have 19x11 et24/50 for my GT. SVE GT7's - aka MRR M600 clone. Was $700 for the set new, maybe less. You will need over 2deg camber up front. I run 2.3F/1.7R for DD anyway so don't mind.

Sponsored

 

[kiksbutt]

I have 19x11 et24/50 for my GT. SVE GT7's - aka MRR M600 clone. Was $700 for the set new, maybe less. You will need over 2deg camber up front. I run 2.3F/1.7R for DD anyway so don't mind.

That's a sweet deal for $700. You're lowered too, right? PP2 stock front camber is at -1.5 I think. I may get camber plates if I decide to do magne lowering springs which I'm still on the fence for .5 inch drop

 

[shogun32]

You're lowered too, right?

Steeda dual-rates so 0.75'ish

PP2 stock front camber is at -1.5 I think.

in theory. Have it checked and dialed in. I doubt it's anywhere near specs.

Sponsored