Decible
Well-Known Member
- Thread starter
- #1
I picked this up at a dealer about a year ago to do the conversion to my 2020. Well traded the 2020 and now have a Mach 1
No need to do the conversion now. Asking $1800.00 Localish pick-up. It would be a nightmare to ship.
The bumper contains the parts listed below which total over $3000.00 and as far as I can tell you can’t get the lower intakes.
Mach 1 Levittown
Front bumper cover: MR3Z-17D957-BDPTM
Mach 1 Upper Grill: MR3Z-8200-AA
Mach 1 Lower Grill: MR3Z-17K945-AA
Mach 1 Upper splitter: MR3Z-17D957-AA
Upper bumper weatherstripping: JR3Z-16A238-B
Mach 1 LH turn signal: MR3Z-13201-A
Mach 1 RH turn signal: MR3Z-13200-A
Mach 1 LH turn signal housing: MR3Z-15266-B
Mach 1 RH turn signal housing: MR3Z-15266-A
You will need a few more parts to complete the conversion.
Mach 1 Left inner fender: MR3Z-16102-A
Mach 1 Right inner fender: MR3Z-16103-A
Mach 1 Underbelly: MR3Z-17626-A
Mach 1 bumper crash isolator : JR3Z-17C882-B
Blue push in nuts to go into subframe for underbelly (x6) : W716529S900
Handling Pack part numbers:
HP Lower Splitter: MR3Z-17626-AA
HP Fender Flares: VMR3Z-16268-A
Refer to threadedMach 1 bumper conversion for details on how to do the conversion. @V8der I believe finished this conversion last year. @LevittownFordParts can help you with the remaining parts.
Bumper was replaced on the car due to paint scuffs. No clip or plastic damage (cracks or gouged) a simple tear down sand and paint is all that is needed.
No need to do the conversion now. Asking $1800.00 Localish pick-up. It would be a nightmare to ship.
The bumper contains the parts listed below which total over $3000.00 and as far as I can tell you can’t get the lower intakes.
Mach 1 Levittown
Front bumper cover: MR3Z-17D957-BDPTM
Mach 1 Upper Grill: MR3Z-8200-AA
Mach 1 Lower Grill: MR3Z-17K945-AA
Mach 1 Upper splitter: MR3Z-17D957-AA
Upper bumper weatherstripping: JR3Z-16A238-B
Mach 1 LH turn signal: MR3Z-13201-A
Mach 1 RH turn signal: MR3Z-13200-A
Mach 1 LH turn signal housing: MR3Z-15266-B
Mach 1 RH turn signal housing: MR3Z-15266-A
You will need a few more parts to complete the conversion.
Mach 1 Left inner fender: MR3Z-16102-A
Mach 1 Right inner fender: MR3Z-16103-A
Mach 1 Underbelly: MR3Z-17626-A
Mach 1 bumper crash isolator : JR3Z-17C882-B
Blue push in nuts to go into subframe for underbelly (x6) : W716529S900
Handling Pack part numbers:
HP Lower Splitter: MR3Z-17626-AA
HP Fender Flares: VMR3Z-16268-A
Refer to threadedMach 1 bumper conversion for details on how to do the conversion. @V8der I believe finished this conversion last year. @LevittownFordParts can help you with the remaining parts.
Bumper was replaced on the car due to paint scuffs. No clip or plastic damage (cracks or gouged) a simple tear down sand and paint is all that is needed.
Last edited: