R Wheel Width

[teamsketch]

I have a trailer that I have used in the past with my Boss 302. When I was running 305 section tires in the rear, it was a tight fit. I fear that a GT350R may not fit at all. Is there a spec online where I can see what the distance is from the outside of one rear wheel to the other? If not does someone with an R mind measuring for me? I really don't want to show up at the dealer after a long drive and not have the car fit.

Sponsored

 

[Bossing]

How wide (floor width) is yoir trailer? My R fits with a little less than an inch & a half remaining on each side (from edge of rear tire to edge of trailer)... my trailer's floor is 82" in width. From edge of L rear tire to edge of R rear tire, it's approx 79"

 

[teamsketch]

How wide (floor width) is yoir trailer? My R fits with a little less than an inch & a half remaining on each side (from edge of rear tire to edge of trailer)... my trailer's floor is 82" in width. From edge of L rear tire to edge of R rear tire, it's approx 79"

Thanks for the feedback. Unfortunately, the floor width on my trailer is 79" so that is definitely not going to work. Oh well, I guess it is time for a bigger trailer...

 

[Bossing]

Thanks for the feedback. Unfortunately, the floor width on my trailer is 79" so that is definitely not going to work. Oh well, I guess it is time for a bigger trailer...

Oh yes 79" will be a very tight squeeze and on the verge of rubbing/scraping or overhanging onto your trailer's flooring edge... I rounded up to 79" but really it's literally a few hairs over 78" in width when l measured it at the rear tires' outer edges.

 

[teamsketch]

Oh yes 79" will be a very tight squeeze and on the verge of rubbing/scraping or overhanging onto your trailer's flooring edge... I overestimated at 79" but really it's literally a few hairs over 78" in width when l measured it at the rear tires' outer edges.

Yeah, I really don't want to deal with myself, when I get it wrong and scrape the CF wheels.

Until I can find a new trailer, I was thinking about finding some cheap wheels I can use in the rear just for when I trailer. Would be a pain to change them back and forth, but better than dealing with scratched wheels.

Sponsored