Procharger HO (stage 1) blow off valve

[Jdotrizzle]

I currently have the procharger stage one kit (HO kit) with the standard proflow bypass valve and it just… doesn’t have any sound to it from inside the car. I called procharger and they said that the big red race valve only works with stage 2. What are my options to increase the sound that will hopefully lead to more enjoyment? I’ve been weighing the option of the bullet open valve. Any others I should consider?

Sponsored

 

[turnswrench]

https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-153&Store_Code=tp

and

https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=TIL-BOV-007&Store_Code=tp

with the -2 psi supercharger spring.

Would look like this:

 

[Jdotrizzle]

And how does it sound compared to the bullet from procharger/other blowoff valves?

 

[turnswrench]

And how does it sound compared to the bullet from procharger/other blowoff valves?

Jump on youtube and look for what you want to hear.

 

[Gregory347]

Looking to upgrade to this. Are those the hoses from the factory Procharger setup?

 

[Jdotrizzle]

Looking to upgrade to this. Are those the hoses from the factory Procharger setup?

I think so. Obviously we have less flexibility because with the stage 2 2” flange, you have the option of the race valve but with the 1.5” we basically need to go to outside sources or settle for the bullet valve

 

[turnswrench]

Looking to upgrade to this. Are those the hoses from the factory Procharger setup?

Yessir.

 

[Jdotrizzle]

Yessir.

One last thing, when you go to the tial blow off, did you need a retune or is the tune fine the way it is?

 

[turnswrench]

One last thing, when you go to the tial blow off, did you need a retune or is the tune fine the way it is?

No need to retune.

 

[Jdotrizzle]

Perfect. I will order it today then and hopefully have it installed soon. I look forward to my car hopefully sounding like a jet plane

 

[Jackson1320]

You can run a tial 50mm and any bov that the stage2 can run. Just get a weld on flange or a coupler with the flange already installed

 

[Jdotrizzle]

one last question, does anyone have any opinions on the turbosmart race port? How does it compare to the others?

 

[Jackson1320]

one last question, does anyone have any opinions on the turbosmart race port? How does it compare to the others?

I have a 50mm tial $100 if you interested. They all sound about the same and loud

 

[Golgo69]

https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-153&Store_Code=tp

and

https://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=TIL-BOV-007&Store_Code=tp

with the -2 psi supercharger spring.

Would look like this:

would this Tial TIL-BOV-007 be the equivalent of the pro charger "Race" blow off valve that's rated for 700-1201 hp? I have that P1sc1 also, but want to upgrade to the race to get more hp over 700. I was told (by pro charger) I'd have to "weld" and get some pipe adapter blah blah blah.....

 

[turnswrench]

Comparable, yes. Both will do well for a p1sc.

Sponsored