Pressure washer suggestions

[Fenix]

I have the Greenworks 1600psi $99 one. It works for me for cleaning siding, decking and washing the cars.

On the topic of foam cannons I found this one on amazon that works well on my pressure washer. Nice shaving cream foam. It includes a smaller inlet port which is sized for electric pressure washers. I bought a much more expensive one that didn't work as well, even though it was claimed to have a smaller inlet port made for lower GPM electric pressure washers.

https://www.amazon.com/gp/product/B01AS8X81Q/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Sponsored

 

[CB]

Not at all, but a good pressure washing before you use a foamer will knock off most of the BIG shit rather than wetting and scrubbing it.

Most of the big shit! You guys run those Mustangs at the Baja 1000.

 

[Obsol3te]

My cars a daily driver, big shit would be random dirt, road grime, possible tar, bugs, etc.

 

[CB]

I suppose you're right. If careful, the pressure washer won't hurt. I have a fair weather Mustang so it only gets dusty. But when it does get washed and waxed, microfiber only touches the car.

 

[gily]

I have a craftsman gas one 2000psi that I bought for about $250, it works really great and will create lots of foam if you use the MTM foam cannon, by the way it does not damage your paint/car, use the white nozzle (check obsessed garage on youtube for detailing tips, he uses an electric one but that one is about $1K)

 

[T-S550-X]

https://www.amazon.com/dp/B00CPGMUX...lid=2SUGTZRLTQL8F&coliid=I3R9HAJ4ZBRCNP&psc=1

+1 on the Sun Joe linked above. I also bought the Chem Bro's foam gun and it's a good combo. I've never used any of the items above before and everything went together just fine. My only complaint is it would have been nice to have measurement marks on the Chem Bro foam gun bottle.

Sponsored