PP Suspension install

[Brian V]

I have been upgrading the suspension on this Ecoboost from OE standard suspension to the GT PP suspensoin adding the differential support Poly differential support and the subframe bushing spacers . Rear PP coil springs and shocks with the Steeda shock mounts . Steeda alignment delrin pins ..

Front PP struts and coil springs to be installed tomarrow ..

My ? At this time is will this system change the geometry of the suspension ?

Sponsored

 

[Nagare]

It shouldn't be anything too dramatic, but the front might sit a little higher due to the difference in engine weight.

If you're wondering if you need an alignment, yes you should get one.

 

[Brian V]

Given your reply to the ? I would have to presume that the front geometry does in fact change given that the strut and coil spring weights are an additional 5 ft/lbs. And the 2.3 engine is lighter . Therefore there will be a higher force added for supporting the front of the vehicle .

I knew undertaking this install that there would be an alignment process that would have to be performed to the Mustang .

Thank you for your reply [MENTION=28654]Nagare[/MENTION] .......

 

[Brian V]

IRS COMPLETED

 

[Brian V]

We

Sponsored