Paxton boost gauge

[Tugger50H]

Adding a mechanical boost gauge to my center vent with the roush vent pod kit. Part #422047. Using an autometer gauge z series gauge.

Questions:

Where should I tap in to the vacuum line for the gauge? Close to the BOV?
Where are you tapping power from to get the guage lights to come on with the dash lights?

Thanks

Sponsored

 

[Tugger50H]

Actually might just put the gauge light on a switch so I can turn if on/off as I please but would still like it to come on automatically and manually off with the switch. I'm sure its probably simple to do but I hate wiring.

 

[venumous]

Used an add a fuse and ran it to the main fuse box for mine. Tapped into one of the main power fuses.

 

[MyLilPony]

Used an add a fuse and ran it to the main fuse box for mine. Tapped into one of the main power fuses.

Did this in the passenger side fuse box. Think it was fuse 36?! I'll look. As for the line, Prochager gives you a vacuum block and that is what I tapped. The Bov line is there as well so you should be able to t that line.

Sponsored