Official MRR Design Flow Forge light weight FS01 info.

[MRRDesignWheels]

Ferrari 458 / MRR Design FS01 Flowforged

Just another look.

Sponsored

 

[Youngmustang]

^^^^ Wow that's a deal you better jump all over that man!! I hope to do these in the full brushed/gloss gunmetal around Christmas time, these wheels are perfect on the S550 imo.

Same here. Either brushed gunmetal or bronze

 

[Need4SpeedMotors]

im excited to get these badass wheels on members rides !

 

[OrangeCrush]

im excited to get these badass wheels on members rides !

Could I get a quote on a squared 19 x 10 set in the level 2 brushed gunmetal finish?

 

[MRRDesignWheels]

FS01 Ferrari Full Look by MRR Wheels

Here it is guys/ a full look at different angles, i know its not a mustang but i feel that the picture can show the details on our work and also the concave design comparison from a front to back wheel.

 

[Waldorf]

Finally!

No Rain + Clean Car = Pics.

FS01 19x10 +35 Square Setup
Goodrich 275/40R19 Sport Comp2
Stock PP Ride Height
35% Tint

[email protected] is THE guy to hook you up. Backspacing machined to your spec. [End of shameless plug! ;)]

That is all...

 

[MELLOWYELLOW06]

Here are a couple shots before I left for Sema

Waiting impatiently for my next set for my new S550!

 

[ronnieb1958]

No Rain + Clean Car = Pics.

FS01 19x10 +35 Square Setup
Goodrich 275/40R19 Sport Comp2
Stock PP Ride Height
35% Tint

niceness...layin' right...nice and tight...

 

[Need4SpeedMotors]

No Rain + Clean Car = Pics.

FS01 19x10 +35 Square Setup
Goodrich 275/40R19 Sport Comp2
Stock PP

[email protected] is THE guy to hook you up. Backspacing machined to your spec. [End of shameless plug! ;)]

That is all...

Looks good brotha !

Here are a couple shots before I left for Sema

Waiting impatiently for my next set for my new S550!

Lol next mnth brotha

 

[tweekdout]

Wow - those FS01 shots from Waldorf look as good as 20s (proportional wheel well fill perspective) of other wheel makes

Sent from my Nexus 6 using Tapatalk

 

[Need4SpeedMotors]

Wow - those FS01 shots from Waldorf look as good as 20s (proportional wheel well fill perspective) of other wheel makes

Sent from my Nexus 6 using Tapatalk

We always do our best to get the best setup everytime

 

[Lobo]

Are the offsets set or is there an option to have it custom made? Also price? Not sure if it was already put up. For 18x10

 

[Waldorf]

Are the offsets set or is there an option to have it custom made? Also price? Not sure if it was already put up. For 18x10

Offsets are made to order. With standard colors... takes about a week turn around time. Custom colors a little longer. A +35 offset with a 10" rim will get you flush with the top of the fender. A +40 offset will bring it in about .200". Fairlly light too... 19x10's weigh in at 23.5 lbs. PM Paul, or drop him a line at: [email protected].

I like mine... I like them ALot!

That is all...

 

[Need4SpeedMotors]

Thanks brotha !

 

[MELLOWYELLOW06]

Here are a couple from yesterday's Supercar Sunday

Sponsored