New RXT clutch chatter?

[doodguy]

So I installed new clutch, dss drive shaft, h pipe, and tires/rims.

Took car for a drive yesterday and when I am in say 5th at 40mph, give car a little gas, I hear a little grinding sound almost like my drive shaft barely rubbing on the safety loop or something. Maybe it sounds more like the grinding sound
You hear after a fresh rain and the rotors have a little rust on them.

Looked under the car, and is not rubbing the safety loop. Is that sound im hearing possibly the rxt clutch chatter?

Sponsored

 

[gsxr1300]

What flywheel did you use?
The RXT is a lot noisier than the stock clutch, you will hear gear roll over when ever you lug around at low rpm. Did you finish the 500-1000 mile break in? I'm at 300 miles on mine now, turn traction control off doing this period.

 

[doodguy]

I used the mcleod steel fly wheel. I'm at like ten miles lol just worried I left something lose somewhere but I really think it's the clutch cuz if I'm just coasting I don't hear it. Going under car now to do my double check.

Why turn traction control off?

 

[gsxr1300]

The RXT breaking instructions said to.

 

[Anthony 05 GT]

If you drive at lower rpm's that twin disc will make a lot of noise. I have one in my '05 and it's the same way. Just drop it down a gear.

 

[Major League Infidel]

Definitely normal. My 12 chattered between 1700-1900 Rpms when lugging around.

 

[Triple Wile E]

The chatter will eventually go away as the clutch break in.

Sponsored