New FS02 Flow Forged By MRR Design Wheels

[Gibbo205]

The M350 is +40 on the front. I was initially going with the Project 6GR wheels but these are +35 on the front which made me worry about the poke, so +40 should be safe and the main reason I changed to the M350.

One question - will the 295/35 fit OK without stretch? (The 305/35 seems hard to source whereas 295/35 are more readily available here in Oz.

Cheers!

Thank you, 20x10 ET40 for the front it is then.

Sponsored

 

[Need4SpeedMotors]

The M350 is +40 on the front. I was initially going with the Project 6GR wheels but these are +35 on the front which made me worry about the poke, so +40 should be safe and the main reason I changed to the M350.

One question - will the 295/35 fit OK without stretch? (The 305/35 seems hard to source whereas 295/35 are more readily available here in Oz.

Cheers!

Ive done the 295/35 on a 11" its perfectly fine, also brotha a 10 ET 35 upfront is fine it doesnt poke.

Reason

I have done as low as a 10 ET 25 and that barely poked out.

 

[Gibbo205]

Ive done the 295/35 on a 11" its perfectly fine, also brotha a 10 ET 35 upfront is fine it doesnt poke.

Reason

I have done as low as a 10 ET 25 and that barely poked out.

Got any pictures of 10 ET35 up front buddy and ideally with a 275 section tyre? I just want no risk of poke, I don't even want it flush I like my wheels set in a little so it looks more factory rather than modified.

 

[MRRDesignWheels]

Got any pictures of 10 ET35 up front buddy and ideally with a 275 section tyre? I just want no risk of poke, I don't even want it flush I like my wheels set in a little so it looks more factory rather than modified.

You should check out terminated car, is even lowered to the floor with no rubbing 19x10 with a 275/35.

 

[Gibbo205]

Carlos

That is ET40 on the front yes?

 

[GreenKnight]

My new favorite wheel. Wonder what pricing would be like for a 19x10 square setup in matte black. Nice touch with the chromed lugnuts and cap as well.

 

[Need4SpeedMotors]

My new favorite wheel. Wonder what pricing would be like for a 19x10 square setup in matte black. Nice touch with the chromed lugnuts and cap as well.

hit me up brotha, id be more then happy to help you out.

 

[MRRDesignWheels]

Carlos

That is ET40 on the front yes?

100% yes

 

[Gibbo205]

100% yes

OK so please note down for my set:
20x11 ET55 rear
20x10 ET40 front


Still yet to decide on colour, want a silver/chrome finish ideally.

 

[MRRDesignWheels]

Oh man these factories always shoot over a surprise lol, so guess what peeps??? I will be posting up a new thread in a day or so, this week Ill have our main samples of the FS02 in our warehouse:hail:, But looks like the FS03 also got a great headstart so I will also create a new thread announcing the new FS03, oh man thats the best thing when you have a great reputation built through years of history with your suppliers then your wheels actually arrive on time.

look out for it guys Im excited to show these 2 new designs. :cheers:

 

[Gibbo205]

Excitement is building.

 

[MRRDesignWheels]

And..... yup DHL just dropped of our samples for the FS02 today :eyebulge:
sorry guys no pics yet, I already turned them in to our finishing department, lets see what these guys come up with

 

[Gibbo205]

And..... yup DHL just dropped of our samples for the FS02 today :eyebulge:
sorry guys no pics yet, I already turned them in to our finishing department, lets see what these guys come up with

Carlos you got any examples of any wheels done in say:
- Silver
- Chrome
- Polished with clear coat or very light smoked clear coat
- Black chrome, smoked chrome or shadow chrome


Trying to decide on colour.

 

[MRRDesignWheels]

Carlos you got any examples of any wheels done in say:
- Silver
- Chrome
- Polished with clear coat or very light smoked clear coat
- Black chrome, smoked chrome or shadow chrome


Trying to decide on colour.

this is a Brush/black chrome level 2
same effect can be done with basic polish face or machine face base.

 

[RubyRed15]

this is a Brush/black chrome level 2
same effect can be done with basic polish face or machine face base.

Do you have any pics of this in less dramatic lighting?

Sponsored