- Thread starter
- #1
The Beefcake Special Packages are always evolving and i've been working on a custom setup for some time to save all the s550 guys a few bucks.
Standard pulley on a tuner kit or complete kit is a 3.8 with the paxton setups and you get the standard bov.
Most of the guys are upgrading to a 3.6 pulley ($85) and then adding the race 360 bov which is another $250 on my sale price, now your at $335, the 360 flows a tad more, but your still limited on the hole size for the bov.
Some opt for a stand alone tial, and then you have to take a pipe, have it welded. etc...
The 3.6 pulley really starts to get a little flutter itself as your right at the edge with the rpms the s550 pull.
My custom 3.6 / bv57 package takes care of that and then some.
for $300 more than my reg beefcake special, you now get the standard 3.6 pulley and we go to the steroid induced BV57 vortech BOV.
The bv57 is a $460 bov with flange, and it flows 1300 cfms, and will handle anything you throw at it.
In addition, this bov will be the standard on the package, so the larger hole and flange will already be in place. So a $460 bov, $85 pulley, and $50 to $100 at your welder. Not to mention the extra time getting it all done, or pulling your piping back apart for is over!!!!
And, your saving about $350
http://www.teambeefcakeracing.com/bfspecs550stage2bov.html
Also, i'll be able to customize this into any of the oil fed competition kits as well for the guys that want a JT, Billet JT, YSI, Billet YSI Vortech, Or HD Paxton.
Here is a pic of the bv57 in a hand to give you an idea of the size (kit includes satin since you don't see it hidden in the fender)
Standard pulley on a tuner kit or complete kit is a 3.8 with the paxton setups and you get the standard bov.
Most of the guys are upgrading to a 3.6 pulley ($85) and then adding the race 360 bov which is another $250 on my sale price, now your at $335, the 360 flows a tad more, but your still limited on the hole size for the bov.
Some opt for a stand alone tial, and then you have to take a pipe, have it welded. etc...
The 3.6 pulley really starts to get a little flutter itself as your right at the edge with the rpms the s550 pull.
My custom 3.6 / bv57 package takes care of that and then some.
for $300 more than my reg beefcake special, you now get the standard 3.6 pulley and we go to the steroid induced BV57 vortech BOV.
The bv57 is a $460 bov with flange, and it flows 1300 cfms, and will handle anything you throw at it.
In addition, this bov will be the standard on the package, so the larger hole and flange will already be in place. So a $460 bov, $85 pulley, and $50 to $100 at your welder. Not to mention the extra time getting it all done, or pulling your piping back apart for is over!!!!
And, your saving about $350
http://www.teambeefcakeracing.com/bfspecs550stage2bov.html
Also, i'll be able to customize this into any of the oil fed competition kits as well for the guys that want a JT, Billet JT, YSI, Billet YSI Vortech, Or HD Paxton.
Here is a pic of the bv57 in a hand to give you an idea of the size (kit includes satin since you don't see it hidden in the fender)
Sponsored