MyGauges Question

[Deleted member 33561]

HEAVYMETALMONK...How do you get that display?? I haven't figured that out I guess. It's just what I was looking for. Mine shows a helmet and it shows a big 1 for first gear. And the gauges in the middle are still analog.

Sponsored

 

[control4userguy]

Hit the down arrow from there.

 

[HeavyMetalMonk]

HEAVYMETALMONK...How do you get that display?? I haven't figured that out I guess. It's just what I was looking for. Mine shows a helmet and it shows a big 1 for first gear. And the gauges in the middle are still analog.

Just put it in track mode and hit the down arrow a couple times. Maybe it doesn't even have to be in track mode?

 

[Deleted member 33561]

Something is missing here because when I hit the down arrow the analog meters just switch to different ones. The left side where the rpm is at does nothing.

 

[HeavyMetalMonk]

Something is missing here because when I hit the down arrow the analog meters just switch to different ones. The left side where the rpm is at does nothing.

It should toggle between the analog gauges, the G-force gauge, and the pic I posted.
And I just tried it, it does not need to be in track mode.

 

[Deleted member 33561]

Mine toggles between the analog meters...first it's 3 meters, then 2 more, then 2 more and then the "G" meters. After the "G" meters it's a blank screen and then next it starts over again. So I guess I've got a blank screen where the Digital stuff should show up.

 

[Shadowblack5oh]

Mine toggles between the analog meters...first it's 3 meters, then 2 more, then 2 more and then the "G" meters. After the "G" meters it's a blank screen and then next it starts over again. So I guess I've got a blank screen where the Digital stuff should show up.

Mine does this too

 

[control4userguy]

This is sounding like a software problem don't you guys think? My take would be nothing but analog dials should be showing. If the controller can't render the digital info streaming in, maybe it juts posts the numeric data. I think it's not normal to be displaying the same limited set of parameters that show in the two photos. Something isn't right...

 

[HeavyMetalMonk]

Mine toggles between the analog meters...first it's 3 meters, then 2 more, then 2 more and then the "G" meters. After the "G" meters it's a blank screen and then next it starts over again. So I guess I've got a blank screen where the Digital stuff should show up.

I wonder if you have all the gauges selected. Try this just for fun:

Push the pony button and go to gauges. Deselect all but 1 or 2. Now go back out to the main screen and use the down button.

Same thing, or is it different now?

ETA- I played with this to see if it made any difference, it doesn't.

 

[Deleted member 33561]

Do you have a manual or automatic tranny ?

 

[Shadowblack5oh]

Manual on mine

 

[Deleted member 33561]

It was just a thought. Mine is A10 so that's not the difference. Maybe it's an update problem. I will contact my dealer next week.

 

[control4userguy]

.. I played with this to see if it made any difference, it doesn't.

Right, look at your photo and mine. Little chance we have the same selections in MyGauges. It's certainly canned to display the same things. Not logical in my book.

 

[HeavyMetalMonk]

Right, look at your photo and mine. Little chance we have the same selections in MyGauges. It's certainly canned to display the same things. Not logical in my book.

Sorry I was talking to the other poster who can't even get to that screen

 

[DukeGaGa]

The picture posted by [MENTION=32734]HeavyMetalMonk[/MENTION] isn't showing anymore.

Sponsored