Sponsored

Lowering on PP2 wheel setup?

Puds

Member
Joined
Aug 31, 2021
Threads
4
Messages
16
Reaction score
6
Location
Ontario, Canada
Vehicle(s)
2019 Mustang GT
I have a PP1 car with PP2 on 305/30R19 all around. I’m looking at Steeda Progressive springs but when I look at the clearance at the front of the car, it looks like the wheel will hit the strut if it comes down. From what I’ve read around here, in order to run wide wheels up front, most are going with coil overs as they’re smaller in diameter in many cases? However I’ve also ready about camber plates, which is new to me. Would Steeda Progressives work with camber plates? If so, how bad would the camber be? First mustang, lots of questions! Thx
Sponsored

 

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
41
Messages
5,623
Reaction score
4,641
Location
Austin
Vehicle(s)
2016 Mustang GT PP
Vehicle Showcase
1
The spring perch doesn’t get any lower when you lower the car, the spring gets shorter and the car above the spring perch comes down.
 

beefcake

Well-Known Member
Diamond Sponsor
Joined
Oct 18, 2014
Threads
1,416
Messages
12,181
Reaction score
4,661
Location
Bethel
Vehicle(s)
2018 Ford Mustang
I have a PP1 car with PP2 on 305/30R19 all around. I’m looking at Steeda Progressive springs but when I look at the clearance at the front of the car, it looks like the wheel will hit the strut if it comes down. From what I’ve read around here, in order to run wide wheels up front, most are going with coil overs as they’re smaller in diameter in many cases? However I’ve also ready about camber plates, which is new to me. Would Steeda Progressives work with camber plates? If so, how bad would the camber be? First mustang, lots of questions! Thx
The Steeda Progressives would be a great option for you. Camber plates aren't required but you'll want to get an alignment for sure with them; shops shouldn't have issues getting the alignment back in spec as well. You can add a set of camber plates if you want extra adjust-ability or be able to fine tune the alignment.

Hit me up and we can get you dialed in for sure!

Feel Free to DM me or call with any questions.
Terry "Beefcake" Reeves
Office - 855-TBR-RACE
Owner Team Beefcake - 20+ Years Experience
Deal Directly with the boss, no pushy sales guys!!!!!!!
https://www.beefcakeracing.com - Your Forced Induction Specialists
#beefcakeracing #teambeefcake
Sponsored

 
 




Top