IN STOCK!!! New Sync3 theme navigation from Moddiction!

[Moddiction]

Do you have correct time zone selected and 12 hour mode selected?

Sponsored

 

[thet33]

Ok, so once you remove the cd player and connect the harness wires to the factory connectors, do you plug the original connectors back into the factory cd player or use the 2 new connectors that are left?

[MENTION=19254]Moddiction[/MENTION]

 

[Moddiction]

The harness is just an extension so connect stock wires to CD player and sync and then to the harness which then connects to the new unit.

 

[tcman54]

I didn't cut anything. I just transferred the rubber from arrows (rectangle) and rubber beneath it (long oval). The only rubber I didn't reuse were the top two squares where key pad and menu pads were.

Ok, thanks

 

[EddieGT]

[MENTION=19254]Moddiction[/MENTION] Yes, everything is correct. Pacific time, 12 hour clock. The minutes always stay correct. The hour however, jumps up or down 1 or 2 hours.

 

[Moddiction]

[MENTION=19254]Moddiction[/MENTION] Yes, everything is correct. Pacific time, 12 hour clock. The minutes always stay correct. The hour however, jumps up or down 1 or 2 hours.

That sounds like a time zone issue. The unit uses time from factory radio. Try changing time zone and see if that helps it.

 

[EddieGT]

Still all fudged up.

 

[SheStang]

Phone Mirror

I have a Samsung Galaxy Note 5 and it doesn't seem to work with the Hdmi, the Samsung cable doesn't fit, the android fits but doesn't give me anything on the screen. Do I need a different cable for the Note 5?

 

[X0AYHAM0X]

I have a Samsung Galaxy Note 5 and it doesn't seem to work with the Hdmi, the Samsung cable doesn't fit, the android fits but doesn't give me anything on the screen. Do I need a different cable for the Note 5?

Note 5 doesn't support MHL
You need to use a wireless adaptor.
http://www.mustang6g.com/forums/showpost.php?p=1340507&postcount=3

 

[SheStang]

Note 5 doesn't support MHL
You need to use a wireless adaptor.
http://www.mustang6g.com/forums/showpost.php?p=1340507&postcount=3

Thanks, just wanted to make sure it wasn't me

 

[tcman54]

I am totally lost at this point:

Step 15 of the install instructions say take out the sync unit (in order to convert the cd connectors which are with short harness)

what does the above mean, is the sync module being wired back into the system?

Terry

 

[Moddiction]

Yes sync systems gets plugged back in. You connect stock wiring to sync and then the harness connects between the sync unit and the new navigation kit.


Same for the radio.

 

[tcman54]

Yes sync systems gets plugged back in. You connect stock wiring to sync and then the harness connects between the sync unit and the new navigation kit.


Same for the radio.

OK, I figured the sync needed to go back in so just got that done, now the only thing is to connect all the cables to the interface unit and I should be good to go.

Terry

 

[JCSIX13]

I know the discount code is somewhere but in 42 pages I can not find it. Can you please post it again.

Thanks
Jack

 

[Moddiction]

Mustangnav5

Sponsored