phrenetiK
IF YOU QUOTE PICS I H8 U
- Thread starter
- #1
Well yesterday was awesome!! We had 32** Houston S550's dyno and a bit over 40 people show up! The event was a huge success and it took all the way through mid afternoon to finish the 31 cars. We even had an appearance from a local in a brand new gorgeous race red GT 350 w/ track pack.
I would like to give a huge shoutout to [MENTION=10893]David@Steeda[/MENTION] for donating some prizes(A Steeda catch can and short throw shifter rod) oh and did I mention their wonderful holiday deals?? Just pm David for the absolute best deal on any parts you want! 2nd huge shoutout goes to [MENTION=18462]patrick@psimotorsports[/MENTION] for having us. They are having an amazing deal on Whipple superchargers(FREE INSTALL?!) right now so check them out if you're looking to make it to the top of our board
Highest HP w/ Forced Induction - Arthur
Highest HP NA - phrenetiK
Highest HP Ecoboost - Chris N.
work in progress...
5.0 FI
Arthur Wilson - 689 - MT - 2.9L Whipple
Chris Lok - 655 - MT - 2.9L Whipple, jms bap, 1000cc, 132mm big tb, mbrp race, stock pulley, lund
Rizky Sekti - 647 - AT - Roush Phase 1, stainless works catless header, fr sport axleback, 75mm pulley, twin 65 throttle body, 1000cc, tuned by st00pidfast
Mike Cortez - 570 - MT - ford racing roush supercharger phase 1, mbrp street
5.0 NA
Chris Rumery - 448 - MT (3.73) - steeda intake, stainless power catless headers, mbrp street, lund flexfuel tune
Carlos Garcia - 435 - MT (3.73) - steeda intake, stainless power catless headers, borla catback, lund flexfuel tune
Michael Mendenhall - 426 - MT - bama tune only
Chris Garces - 419 - MT - JLT intake, lund 93 tune, magnaflow catback
Sean Sesher - 418 - AT - kooks catless headers, bama tune, FRPP catback, airraid
R. Scott Ezzell - 417 - MT (3.31) - JLT cai, corsa catback, lund flex fuel tune
Kevin Mayberry - 416 - AT - stainless works catless headers, ford racing catback, airraid cai, lund tune
Mark Magalski - 410 - AT - kooks catted longtubes, lund 93 tune, jlt, borla
Andres Aggy - 408 - airaid intake, no tune, borla s-type catback
Daniel Sanchez - 403 - MT - h pipe only
Bobby Jonson - 402 - MT - bone stock
Tim Roberts - 398 - MT (3.31) - airaid, magnaflow catback, bama 87/89 tune - fuel cut at 6300 rpm due to bama leaving speed limiter on.
Jayme Smith - 398 - AT - JDM engineering tune, roush cai, lethal performance x pipe, rtr axle back
Chris Reed - 397 - MT - steeda w/ insert, lethal h pipe, roush axle back
Alex Lozano - 397 - MT - bone stock
Jorge Banuelos - 397 - mt - MBRP cat backs, airaid intake
Eloy Gonzalez - 393 - MT - ford racing x pipe + muffler delete
Robert Hunter - 390 - MT - bone stock
Jess Pittman - 385 - AT - bone stock
Tony Garza - 384 - AT - airraid intake, 3" gibson catback
Daniel Nguyen - 382 - MT - steeda w/insert, mbrp street, 87 mixed with 93 stock tune
Fidel Arredondo - 380 - AT - bone stock
ECOBOOST
Chris Nguyen - 319 - AT - tune, catless dp, intake, intercooler, charge pipes, wastegate, spark plugs ... has run a 12.7 in the 1/4 mile...his car was likely having trouble on the dyno
Rex McLaren - 246 - ?? - map catback + drop in filter
ECOBOOST
Chris Nguyen - 319 - AT - tune, catless dp, intake, intercooler, charge pipes, wastegate, spark plugs ... has run a 12.7 in the 1/4 mile...his car was likely having trouble on the dyno
Rex McLaren - 246 - ?? - map catback + drop in filter
The first 15~ cars in line for the dyno
After the dyno a few of us stopped by Bone Daddy's for some grub!
Overall the meet was great, and we are looking forward to a track day as our next event besides our monthly meets!
Oh and everyone can chime in with their own dyno videos but here is mine
[ame]
I would like to give a huge shoutout to [MENTION=10893]David@Steeda[/MENTION] for donating some prizes(A Steeda catch can and short throw shifter rod) oh and did I mention their wonderful holiday deals?? Just pm David for the absolute best deal on any parts you want! 2nd huge shoutout goes to [MENTION=18462]patrick@psimotorsports[/MENTION] for having us. They are having an amazing deal on Whipple superchargers(FREE INSTALL?!) right now so check them out if you're looking to make it to the top of our board
Highest HP w/ Forced Induction - Arthur
Highest HP NA - phrenetiK
Highest HP Ecoboost - Chris N.
work in progress...
5.0 FI
Arthur Wilson - 689 - MT - 2.9L Whipple
Chris Lok - 655 - MT - 2.9L Whipple, jms bap, 1000cc, 132mm big tb, mbrp race, stock pulley, lund
Rizky Sekti - 647 - AT - Roush Phase 1, stainless works catless header, fr sport axleback, 75mm pulley, twin 65 throttle body, 1000cc, tuned by st00pidfast
Mike Cortez - 570 - MT - ford racing roush supercharger phase 1, mbrp street
5.0 NA
Chris Rumery - 448 - MT (3.73) - steeda intake, stainless power catless headers, mbrp street, lund flexfuel tune
Carlos Garcia - 435 - MT (3.73) - steeda intake, stainless power catless headers, borla catback, lund flexfuel tune
Michael Mendenhall - 426 - MT - bama tune only
Chris Garces - 419 - MT - JLT intake, lund 93 tune, magnaflow catback
Sean Sesher - 418 - AT - kooks catless headers, bama tune, FRPP catback, airraid
R. Scott Ezzell - 417 - MT (3.31) - JLT cai, corsa catback, lund flex fuel tune
Kevin Mayberry - 416 - AT - stainless works catless headers, ford racing catback, airraid cai, lund tune
Mark Magalski - 410 - AT - kooks catted longtubes, lund 93 tune, jlt, borla
Andres Aggy - 408 - airaid intake, no tune, borla s-type catback
Daniel Sanchez - 403 - MT - h pipe only
Bobby Jonson - 402 - MT - bone stock
Tim Roberts - 398 - MT (3.31) - airaid, magnaflow catback, bama 87/89 tune - fuel cut at 6300 rpm due to bama leaving speed limiter on.
Jayme Smith - 398 - AT - JDM engineering tune, roush cai, lethal performance x pipe, rtr axle back
Chris Reed - 397 - MT - steeda w/ insert, lethal h pipe, roush axle back
Alex Lozano - 397 - MT - bone stock
Jorge Banuelos - 397 - mt - MBRP cat backs, airaid intake
Eloy Gonzalez - 393 - MT - ford racing x pipe + muffler delete
Robert Hunter - 390 - MT - bone stock
Jess Pittman - 385 - AT - bone stock
Tony Garza - 384 - AT - airraid intake, 3" gibson catback
Daniel Nguyen - 382 - MT - steeda w/insert, mbrp street, 87 mixed with 93 stock tune
Fidel Arredondo - 380 - AT - bone stock
ECOBOOST
Chris Nguyen - 319 - AT - tune, catless dp, intake, intercooler, charge pipes, wastegate, spark plugs ... has run a 12.7 in the 1/4 mile...his car was likely having trouble on the dyno
Rex McLaren - 246 - ?? - map catback + drop in filter
ECOBOOST
Chris Nguyen - 319 - AT - tune, catless dp, intake, intercooler, charge pipes, wastegate, spark plugs ... has run a 12.7 in the 1/4 mile...his car was likely having trouble on the dyno
Rex McLaren - 246 - ?? - map catback + drop in filter
The first 15~ cars in line for the dyno
After the dyno a few of us stopped by Bone Daddy's for some grub!
Overall the meet was great, and we are looking forward to a track day as our next event besides our monthly meets!
Oh and everyone can chime in with their own dyno videos but here is mine
[ame]
Sponsored
Last edited: