Help choosing a grill

[BLUE DEVIL]

2017 GT PP1, Lightning Blue with Black Roof

https://www.cervinis.com/2015-2016-c-series-mustang-grilles.html

OR

https://www.americanmuscle.com/rtr-grille-1516.html

OR

Open to other 3 section top grills.....no LED, must be compatible with the Velossatech ram air inlet.

Sponsored

 

[myboostedgst]

I was considering the two that you listed. I decided on the Cervini C-Series as the “fangs” were a bit more pronounced. I couldn’t be happier with my choice.

 

[LethalBlake]

2017 GT PP1, Lightning Blue with Black Roof

https://www.cervinis.com/2015-2016-c-series-mustang-grilles.html

OR

https://www.americanmuscle.com/rtr-grille-1516.html

OR

Open to other 3 section top grills.....no LED, must be compatible with the Velossatech ram air inlet.

I personally prefer the grille deletes! Please let me know if we can help with that item as we are a Cervini's dealer!

 

[BLUE DEVIL]

I looked at the grill deletes, I do like them.They look very aggressive and raw! A little to raw for me personally.

Plus I live in the Chicago area where highways and roads are literally coming apart in chunks, we have lots of debris/trash/truck tire pieces. Makes me a bit worried about having nothing in front of the radiator area. I have lost 3 windshields in the past 3 years on my DD.

I will let you know on the Cervin's, it is my preferance, but just want to see if there is another option or mod I may be unaware of.

 

[LethalBlake]

I looked at the grill deletes, I do like them.They look very aggressive and raw! A little to raw for me personally.

Plus I live in the Chicago area where highways and roads are literally coming apart in chunks, we have lots of debris/trash/truck tire pieces. Makes me a bit worried about having nothing in front of the radiator area. I have lost 3 windshields in the past 3 years on my DD.

I will let you know on the Cervin's, it is my preferance, but just want to see if there is another option or mod I may be unaware of.

If you are concerned about debris we offer our LP grille delete with the option of black anodized billet mesh: https://www.lethalperformance.com/lethal-performance-2015-2016-2017-mustang-grille-delete-combo.html

 

[ModularKid21]

I bought the pre cut powder coated grill mesh pieces from customcargrills.com. Cost me $100 and a few hours of my time

 

[BLUE DEVIL]

If you are concerned about debris we offer our LP grille delete with the option of black anodized billet mesh

Any pics of this option on a car?

I bought the pre cut powder coated grill mesh pieces from customcargrills.com. Cost me $100 and a few hours of my time

Nice!! I assume an original grill surround with aftermarket mesh installed? If so not an option for me, I have mild-moderate hand tremors (I am 52 had since my mid-20's, it's genetic) and cannot do fine detail work anymore......at least to my OCD expectations.

 

[HopfibreSn]

I bought the pre cut powder coated grill mesh pieces from customcargrills.com. Cost me $100 and a few hours of my time

Looks great, where did you get the upper and lower grill from?

 

[LethalBlake]

Any pics of this option on a car?

Here are a few pictures on our 18' shop car

 

[ModularKid21]

Any pics of this option on a car?



Nice!! I assume an original grill surround with aftermarket mesh installed? If so not an option for me, I have mild-moderate hand tremors (I am 52 had since my mid-20's, it's genetic) and cannot do fine detail work anymore......at least to my OCD expectations.

All good. They have an option of getting a grill with the mesh pre-installed. But it’s kinda pricey at $360. Although, that is cheaper than some other grill offerings. Link below

https://www.customcargrills.com/Custom-Ford-Mustang-Grills.asp

 

[ModularKid21]

Looks great, where did you get the upper and lower grill from?

Used the factory ones off my car. Originally, I was going to pick up a pair of take-offs and modify those, then do the swap all at once. But with the extra cost of the grills, and the fact that my cars isn’t my daily driver, I decided to save the money and use the ones the car came with. Steeda does sell upper and lower replacements (already modified with grill backs removed) for like $200 a set I believe

Link added; https://www.steeda.com/2015-2019-mustang-grilles-and-inserts

 

[myboostedgst]

The one thing to consider with all of the options using the stock grill inserts. The “fangs” or whatever you want to call them are way less aggressive than most aftermarket options. The aftermarket ones extend significantly more outwards (towards the front of the car). They aren’t quite as sunken in.

Some people like extra boldness/aggressiveness, some don’t. Just be aware that at the end of the day, cutting the stock honeycomb out and adding a mesh insert only gets you 60% of the way to the Cervinis/RTR options.

Sponsored