HellHorse 4" to 8" Conversion

[agolder]

For those who done HellHorse 4" to 8" upgrade using their kit, do you know if there is a how-to video specific to that kit or can I pretty much use 4dtech installation video? Also what are some tricks/tips would you recommend?

Got my kit a few days ago and plan on doing the upgrade tomorrow.

Thanks,
Alex

Sponsored

 

[18usc371]

Yes - the 4D video is good

https://www.mustang6g.com/forums/threads/sync-3-swap-its-all-in-here.82973/page-122#post-2737237

Tip - after all the harnesses are wired, power everything and test function radio, nav, sync, etc, before screwing everything back and replacing the trim. It's easy to miss one plug and then you have to undo everything. Don't ask how I know , , ,

 

[agolder]

Yes - the 4D video is good

https://www.mustang6g.com/forums/threads/sync-3-swap-its-all-in-here.82973/page-122#post-2737237

Tip - after all the harnesses are wired, power everything and test function radio, nav, sync, etc, before screwing everything back and replace the trim. It's easy to miss one plug and then you have to undo everything. Don't ask how I know , , ,

thanks for the tip

Sponsored